https://quickchangetool.com Sat, 18 Apr 2026 13:32:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://quickchangetool.com/2025/04/all-carb-11xaxa-250-111-wedge-type-quick-change-tool-post-set-for-6-12-lathe/ https://quickchangetool.com/2025/04/all-carb-11xaxa-250-111-wedge-type-quick-change-tool-post-set-for-6-12-lathe/#comments Sat, 19 Apr 2025 11:15:42 +0000 https://quickchangetool.com/2025/04/all-carb-11xaxa-250-111-wedge-type-quick-change-tool-post-set-for-6-12-lathe/













Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. Suitable for the lathe with center line height Around 0.5″ (The top cross slide tool post Mounting Surface to the lathe center line)such as: South Bend 9″&10″, Atlas 10&12″, Delta 10&11 Nardini TT1000 & TT1200 and many other imported lathe. ALL-CARB 11×AXA 250-111 Wedge Type Quick Change Tool Post Set for 6″ – 12″ Lathe. Wedge type tool posts are precision engineered to assure repetitive accuracy. Wedge type tool posts have the Maximum rigidity to get the chatter free cutting. No time wasted with shims. All working parts hardened and precision ground, more durable and hardness. The tool post comes with a blank T-Nut plate, the customer have to do some machining work to make it fit into their own specific lathe T slot. 250-101 Turning & Facing Tool Holders, use tool bits up to 1/2. 250-101XL Over Size Turning & Facing Tool Holder use tool bits up to 5/8. 250-102 Boring, Turning & Facing Tool Holders, use tool bits up to 1/2″ and round shank bits up to 7/16″. 250-102XL Over Size Boring, Turning & Facing Tool holder use Tool Bits up to 5/8. 250-104 Heavy Duty Boring Bar Holder, can use 5/8″ and 3/4″ two size shank boring bars. 250-107 Parting Blade Tool Holder, use 1/2 height parting blades. 250-110 Knurling, Facing and Turning Tool Holder, apart from Knurling, can also Turning with bit up to 1/2. Two Wheel Knurling Tool can be used separately with any square tool bit holders. Brand new; Made of High Quality Steel, Wedge Type. This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! Includes: 1 × 251-111 AXA Size Wedge Type Tool Post 2 × 250-101 Turning & Facing Tool Holders 2 × 250-101XL Over Size Turning & Facing Tool Holders 1 × 250-102 Boring, Turning & Facing Tool Holders 1 × 250-102XL Over Size Boring, Turning & Facing Tool holder 1 × 250-104 Heavy Duty Boring Bar Holder 1 × 250-107 Parting Blade Tool Holder 1 × 250 -110 Knurling and Turning Tool Holder 1 × Two Wheel Knurling Tool can be used separately with any square tool bit holders. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2025/04/all-carb-11xaxa-250-111-wedge-type-quick-change-tool-post-set-for-6-12-lathe/feed/ 0 https://quickchangetool.com/2024/11/all-carb-10pack-2-axa-250-102-quick-change-tool-post-boring-turning-holder/ https://quickchangetool.com/2024/11/all-carb-10pack-2-axa-250-102-quick-change-tool-post-boring-turning-holder/#comments Wed, 27 Nov 2024 16:13:01 +0000 https://quickchangetool.com/2024/11/all-carb-10pack-2-axa-250-102-quick-change-tool-post-boring-turning-holder/









Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. Features: AXA Size Quick Change Tool Post Set for Lathe 6 – 12″ 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2″ and round shank tool bits up to 7/16″ Brand new Suitable for lathe center height 0.6 – 1.75″ (top compound surface to lathe center line). ALL-CARB 10Pack 2# AXA 250-102 Quick Change Tool Post Boring Turning Holder. Such as: South Bend 9″ & 10″, Atlas 10 & 12″, Delta 10 & 11″ Nardini TT1000 & TT1200 and many other import lathes. Interchangeable With Aloris, Dorian, Yuasa & Phase II. It is precision engineered to assure repetitive accuracy. No time wasted with shims. All working parts hardened and precision ground. This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! Includes: 10 × 250-102 boring and turning holder. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2024/11/all-carb-10pack-2-axa-250-102-quick-change-tool-post-boring-turning-holder/feed/ 0 https://quickchangetool.com/2024/09/all-carb-10pcs-bxa-250-201t-oversize-34-turning-quick-change-tool-post-holder-2/ https://quickchangetool.com/2024/09/all-carb-10pcs-bxa-250-201t-oversize-34-turning-quick-change-tool-post-holder-2/#comments Tue, 10 Sep 2024 06:10:46 +0000 https://quickchangetool.com/2024/09/all-carb-10pcs-bxa-250-201t-oversize-34-turning-quick-change-tool-post-holder-2/









Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ALL-CARB 10Pcs BXA 250-201T Oversize 3/4 Turning Quick Change Tool Post Holder. Features: Quick Change Turning and Facing Lathes Tool Post Holder Use for lathe swing 10-15″ piston Type or wedge type tool posts sets 250-201T Oversize Turning Tool Holders, use tool bit up to 3/4″ Plenty of working positions for more tool holder. Adjust height of cutting edge easily and accurately. For manual and CNC-lathe. Holder provides maximum rigidity and absence of vibration prevents breaking blades! Precision ground and hardened. Completely sealed for maintenance free operation Turning and facing tools can be locked together (saving time and labor when changing operations). This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! Includes: 10× 250-201T oversize 3/4 Turning Quick Change Tool Post Holder. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2024/09/all-carb-10pcs-bxa-250-201t-oversize-34-turning-quick-change-tool-post-holder-2/feed/ 0 https://quickchangetool.com/2024/08/all-carb-axa-250-111-set-wedge-type-quick-change-tool-post-set-swing-dia-12-3/ https://quickchangetool.com/2024/08/all-carb-axa-250-111-set-wedge-type-quick-change-tool-post-set-swing-dia-12-3/#comments Wed, 28 Aug 2024 17:00:44 +0000 https://quickchangetool.com/2024/08/all-carb-axa-250-111-set-wedge-type-quick-change-tool-post-set-swing-dia-12-3/













No time wasted with shims. All working parts hardened and precision ground. Wedge type tool post are precision engineered to assure repeatability accuracy. Wedge type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 – 1.75″ (top compound surface to lathe center line), such as: South Bend 9″ & 10″, Atlas 10 & 12″, Delta 10 &11 Nardini TT1000 & TT1200 and many other import lathes. ALL-CARB AXA 250-111 Set Wedge Type Quick Change Tool Post Set Swing Dia 12. Features: This product comes with best after-sales service. We are committed to delivering durable high-quality product for you. Thank you for choosing our product! Whole set includes one each of. 250-111 Wedge Type Tool Post. 250-101 Turning Tool Holder, use tool bit up to 1/2. 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2″ and round shank tool bits up to 7/16″. 250-104 Heavy Duty Boring Bar Holder, use 5/8 and 3/4 shank boring bars. 250-107 Parting Blade Tool Holder, use 1/2 high parting blades. 250-110 Knurling and Turning Tool Holder. Note: A minor difference in product design may result in a different model. Please carefully check if the pictures match with your product. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2024/08/all-carb-axa-250-111-set-wedge-type-quick-change-tool-post-set-swing-dia-12-3/feed/ 0 https://quickchangetool.com/2024/07/all-carb-5x-cxa-4-250-304-heavy-quick-change-tool-post-boring-bar-holder-13-18/ https://quickchangetool.com/2024/07/all-carb-5x-cxa-4-250-304-heavy-quick-change-tool-post-boring-bar-holder-13-18/#comments Tue, 09 Jul 2024 12:16:40 +0000 https://quickchangetool.com/2024/07/all-carb-5x-cxa-4-250-304-heavy-quick-change-tool-post-boring-bar-holder-13-18/









Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ALL-CARB 5× CXA #4 250-304 Heavy Quick Change Tool Post Boring Bar Holder 13-18. CXA #4 QUICK CHANGE BORING BAR TOOL POST 250-304. For use with CXA tool posts 250-300 or 250-333. Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4″ tool with bushing, 1″ diameter without bushing. Interchangeable with Dorian, Aloris, & Phase II CXA series tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts. Precision ground and hardened. Completely sealed for maintenance free operation. This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! Includes: 5 × CXA #4 250-304 Quick Change Tool Post Holder. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2024/07/all-carb-5x-cxa-4-250-304-heavy-quick-change-tool-post-boring-bar-holder-13-18/feed/ 0 https://quickchangetool.com/2024/06/all-carb-10pcs-bxa-250-201t-oversize-34-turning-quick-change-tool-post-holder/ https://quickchangetool.com/2024/06/all-carb-10pcs-bxa-250-201t-oversize-34-turning-quick-change-tool-post-holder/#comments Sun, 23 Jun 2024 22:28:55 +0000 https://quickchangetool.com/2024/06/all-carb-10pcs-bxa-250-201t-oversize-34-turning-quick-change-tool-post-holder/









Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ALL-CARB 10Pcs BXA 250-201T Oversize 3/4 Turning Quick Change Tool Post Holder. Features: Quick Change Turning and Facing Lathes Tool Post Holder Use for lathe swing 10-15″ piston Type or wedge type tool posts sets 250-201T Oversize Turning Tool Holders, use tool bit up to 3/4″ Plenty of working positions for more tool holder. Adjust height of cutting edge easily and accurately. For manual and CNC-lathe. Holder provides maximum rigidity and absence of vibration prevents breaking blades! Precision ground and hardened. Completely sealed for maintenance free operation Turning and facing tools can be locked together (saving time and labor when changing operations). This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! Includes: 10× 250-201T oversize 3/4 Turning Quick Change Tool Post Holder. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2024/06/all-carb-10pcs-bxa-250-201t-oversize-34-turning-quick-change-tool-post-holder/feed/ 0 https://quickchangetool.com/2024/06/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder-3/ https://quickchangetool.com/2024/06/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder-3/#comments Thu, 06 Jun 2024 21:08:22 +0000 https://quickchangetool.com/2024/06/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder-3/









Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. Features: QUICK CHANGE BORING, TURNING & FACING HOLDER. SERIES: CXA CONDITION: NEW Suitable for lathe Swing Diameter 13 – 18″ (lathe center height 1.125 – 2.125″ top compound surface to lathe center line). 250-302 Boring, Turning Tool Holder, use tool bit up to 3/4″ and round shank tool bits up to 3/4″. Precision ground and hardened. Completely sealed for maintenance free operation. ALL-CARB 10× CXA 250-302 #2 Quick Change Tool Post Boring Turning Facing Holder. This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! Includes: 10× CXA #2 250-302 Quick Change Tool Post Holder. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2024/06/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder-3/feed/ 0 https://quickchangetool.com/2024/05/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder-2/ https://quickchangetool.com/2024/05/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder-2/#comments Mon, 27 May 2024 07:26:56 +0000 https://quickchangetool.com/2024/05/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder-2/









Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. Features: QUICK CHANGE BORING, TURNING & FACING HOLDER. SERIES: CXA CONDITION: NEW Suitable for lathe Swing Diameter 13 – 18″ (lathe center height 1.125 – 2.125″ top compound surface to lathe center line). 250-302 Boring, Turning Tool Holder, use tool bit up to 3/4″ and round shank tool bits up to 3/4″. Precision ground and hardened. Completely sealed for maintenance free operation. ALL-CARB 10× CXA 250-302 #2 Quick Change Tool Post Boring Turning Facing Holder. This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! Includes: 10× CXA #2 250-302 Quick Change Tool Post Holder. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2024/05/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder-2/feed/ 0 https://quickchangetool.com/2024/05/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder/ https://quickchangetool.com/2024/05/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder/#comments Wed, 08 May 2024 17:53:22 +0000 https://quickchangetool.com/2024/05/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder/









Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. Features: QUICK CHANGE BORING, TURNING & FACING HOLDER. SERIES: CXA CONDITION: NEW Suitable for lathe Swing Diameter 13 – 18″ (lathe center height 1.125 – 2.125″ top compound surface to lathe center line). 250-302 Boring, Turning Tool Holder, use tool bit up to 3/4″ and round shank tool bits up to 3/4″. Precision ground and hardened. Completely sealed for maintenance free operation. ALL-CARB 10× CXA 250-302 #2 Quick Change Tool Post Boring Turning Facing Holder. This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! Includes: 10× CXA #2 250-302 Quick Change Tool Post Holder. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2024/05/all-carb-10x-cxa-250-302-2-quick-change-tool-post-boring-turning-facing-holder/feed/ 0 https://quickchangetool.com/2024/05/all-carb-10pcs-bxa-1-250-201-quick-change-tool-post-holder-turning-facing/ https://quickchangetool.com/2024/05/all-carb-10pcs-bxa-1-250-201-quick-change-tool-post-holder-turning-facing/#comments Fri, 03 May 2024 17:18:51 +0000 https://quickchangetool.com/2024/05/all-carb-10pcs-bxa-1-250-201-quick-change-tool-post-holder-turning-facing/









Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. Securely holds 1/4 – 5/8 square diameter tool bits. Interchangeable with Dorian, Aloris, & Phase II BXA series tool posts. For use with BXA tool posts 250-200 or 250-222. Precision ground and hardened. Completely sealed for maintenance free operation. Turning and facing tools can be locked together (saving time and labor when changing operations). ALL-CARB 10Pcs BXA #1 250-201 Quick Change Tool Post Holder Turning & Facing. The Product Has Passed Strict Quality Testing. Durable And Easy To Install And Replace. Cost-effective, Good After-sales Service. Quality Assurance For Your Peace Of Mind. This product offers the best after-sales service. We are committed to providing you with durable and high quality products. Thank you for choosing our products! 10Tool Post Holder 250-201. Quick Change Tool Post. And our office is closed on Sunday and we apologize for the late reply during the holidays. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US.

]]> https://quickchangetool.com/2024/05/all-carb-10pcs-bxa-1-250-201-quick-change-tool-post-holder-turning-facing/feed/ 0