https://quickchangetool.com Tue, 14 Apr 2026 01:23:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://quickchangetool.com/2026/01/fine-ground-multifix-b-quick-change-tool-post-with-bh32130-holder/ https://quickchangetool.com/2026/01/fine-ground-multifix-b-quick-change-tool-post-with-bh32130-holder/#comments Thu, 01 Jan 2026 10:34:43 +0000 https://quickchangetool.com/2026/01/fine-ground-multifix-b-quick-change-tool-post-with-bh32130-holder/
















This listing includes B tool post and BH32130 round tool holder only. Gross weight:7.8 KGS. If customer needs whole B kit, needs to place order to another listing which includes 3 PCS BD25120 holders. An be used on lathe which turning diameter is from 300mm to 500mm. (11.8″ to 19.7″ swing lathe). Standard B kit includes. 1 X B multifix tool post and locking wrench. 3 X fine ground turning tool holders BD25100Max. Can hold 25 MM shank height tool. 1 X round tool holder BH32130. With large V notch which can accept 30MM dia. 1 X T wrench for tool holder. 1 X simple installation manual in English. Package carton size is 31X23X18CM. Net weight is 11.2KGS. Gross weight is 12.6 KGS(26.5 LBS). Because the biggest listing value can’t exceed USD500 in my store. So i split the B kit to 2 listings. We have sales in US, Germany, etc.

]]> https://quickchangetool.com/2026/01/fine-ground-multifix-b-quick-change-tool-post-with-bh32130-holder/feed/ 0 https://quickchangetool.com/2025/10/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eh30100-holders/ https://quickchangetool.com/2025/10/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eh30100-holders/#comments Sun, 12 Oct 2025 18:42:41 +0000 https://quickchangetool.com/2025/10/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eh30100-holders/












This E kit is not a standard model. An be used on C06230 lathe which turning diameter is from 200mm to 400mm. (8″ to 16″ swing lathe). It’s about similar size as BXA piston type quick change tool post which is for swing 10–15 lathe. 1 X E multifix tool post and locking wrench. 3 X fine ground turning tool holders ED25100Max. Can hold 25 MM shank height tool. 1 X round tool holder EH30100. With large V notch for round shank tool. 1 X T wrench for tool holder. 1 X simple installation manual in English. Package carton size is 31X23X18CM. Net weight is 8.2KGS. Gross weight is 8.9KGS(19.67LBS). We have sales in many countries.

]]> https://quickchangetool.com/2025/10/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eh30100-holders/feed/ 0 https://quickchangetool.com/2025/09/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eb30100-holders-2/ https://quickchangetool.com/2025/09/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eb30100-holders-2/#comments Tue, 02 Sep 2025 17:22:52 +0000 https://quickchangetool.com/2025/09/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eb30100-holders-2/














This E kit is not a standard model. An be used on C06230 lathe which turning diameter is from 200mm to 400mm. (8″ to 16″ swing lathe). It’s about similar size as BXA piston type quick change tool post which is for swing 10–15 lathe. 1 X E multifix tool post and locking wrench. 3 X fine ground turning tool holders ED25100Max. Can hold 25 MM shank height tool. 1 X turning boring tool holder EB30100. With small V notch for round shank. The spline is EDM cut, not fine ground. 1 X T wrench for tool holder. 1 X Installation manual in English. But they can fit well and work together. This kit doesn’t include. Fine ground boring tool holder EH30100. Which has large V notch for round shank tool. Package carton size is 31X23X18CM. Net weight is 8.2KGS. Gross weight is 8.9KGS(19.67LBS). Despite of EB30100, others are of same source as creatools E multifix tool post and holders. We have sales in many countries.

]]> https://quickchangetool.com/2025/09/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eb30100-holders-2/feed/ 0 https://quickchangetool.com/2025/08/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eb30100-holders/ https://quickchangetool.com/2025/08/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eb30100-holders/#comments Sun, 03 Aug 2025 04:21:43 +0000 https://quickchangetool.com/2025/08/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eb30100-holders/














This E kit is not a standard model. An be used on C06230 lathe which turning diameter is from 200mm to 400mm. (8″ to 16″ swing lathe). It’s about similar size as BXA piston type quick change tool post which is for swing 10–15 lathe. 1 X E multifix tool post and locking wrench. 3 X fine ground turning tool holders ED25100Max. Can hold 25 MM shank height tool. 1 X turning boring tool holder EB30100. With small V notch for round shank. The spline is EDM cut, not fine ground. 1 X T wrench for tool holder. 1 X Installation manual in English. But they can fit well and work together. This kit doesn’t include. Fine ground boring tool holder EH30100. Which has large V notch for round shank tool. Package carton size is 31X23X18CM. Net weight is 8.2KGS. Gross weight is 8.9KGS(19.67LBS). Despite of EB30100, others are of same source as creatools E multifix tool post and holders. We have sales in many countries.

]]> https://quickchangetool.com/2025/08/fine-ground-multifix-e-quick-change-tool-post-with-ed25100-eb30100-holders/feed/ 0 https://quickchangetool.com/2023/07/fine-ground-quick-change-tool-post-a-multifix-type-a-with-ad2090-ah2090-holders/ https://quickchangetool.com/2023/07/fine-ground-quick-change-tool-post-a-multifix-type-a-with-ad2090-ah2090-holders/#comments Wed, 26 Jul 2023 10:49:07 +0000 https://quickchangetool.com/2023/07/fine-ground-quick-change-tool-post-a-multifix-type-a-with-ad2090-ah2090-holders/












Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6″-12″). One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning facing tool holders A1D2090. Can hold 20 MM (20/25″=0.8″) shank turning tool. Will hold tool 8mm to 20mm. 1 X boring turning facing tool holder A1B2090. 1 X Tool Clamping T wrench. The spline of the tool holders are EDM cut, not fine ground. Canada, USA and some European countries like France, Norway, etc. PLEASE REFER TO DIAGRAM IN PICTURE MODEL NAME- A1(540-100) D20. Cam-lock handle rigidity locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws 3. Tools can be reground without removal form tool holder so the setting remains unaltered 4. 40 different angles are conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post:HRC 50±2 degree after heat-treatment. Toolholder:HRC 42±2 degree after heat-treatment. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characteried by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. Includes 3 standard holders & one boring holde. CONTENTS- THIS SET CONSISTS OF ONE MAIN BLOCK, 3 STANDARD HOLDER, 1 BORING HOLDER AND HANDLE SUITABLE WITH TOOLPOST.

]]> https://quickchangetool.com/2023/07/fine-ground-quick-change-tool-post-a-multifix-type-a-with-ad2090-ah2090-holders/feed/ 0 https://quickchangetool.com/2022/08/fine-grinded-quick-change-tool-post-a-multifix-type-a-with-ad1675-ah2085-holders/ https://quickchangetool.com/2022/08/fine-grinded-quick-change-tool-post-a-multifix-type-a-with-ad1675-ah2085-holders/#comments Tue, 23 Aug 2022 10:52:05 +0000 https://quickchangetool.com/2022/08/fine-grinded-quick-change-tool-post-a-multifix-type-a-with-ad1675-ah2085-holders/











Multifix 40 Position Q. Size A (fine grinded model). 4.69kgs/set (Some manufacturers and dealers call this model size A1). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6″–12″), lathe tool top slide width range 75–100mm. On the photo you can see A size tool post we installed on 210 MM swing bench lathe. One set A includes: 1 X 540-100 A tool post and locking wrench. 3 X turning facing tool holders AD1675. Can hold 16 MM (0.63) shank turning tool. Holder length 75 MM. 1 X boring tool holder AH2085. The teeth parts of the holders are fine grinded and shining like mirror. 1 X Tool clmaping T wrench. 1 X English operation manual. OEM for German Amestra and some famous brands like OPTI, knoot, etc. Same as Cr eatetool’s multifix A. The teeth parts are fine grinded. Not cut by EDM. On Toptech’s catalogue this model number is SWH1-A. Have sales in Italy and many countries. Usually we have stock. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post”. The seller is “sino-sd” and is located in this country: CN. This item can be shipped worldwide.

• Non-Domestic Product: No
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• Featured Refinements: Lathe Tool Post
• Model: A-AD2090AH2085
• Brand: Amestra
• Tool Post Type: Quick Change Tool Post

]]> https://quickchangetool.com/2022/08/fine-grinded-quick-change-tool-post-a-multifix-type-a-with-ad1675-ah2085-holders/feed/ 0 https://quickchangetool.com/2022/07/fine-grinded-lathe-40-position-quick-change-tool-post-multifix-size-b-holders/ https://quickchangetool.com/2022/07/fine-grinded-lathe-40-position-quick-change-tool-post-multifix-size-b-holders/#comments Fri, 22 Jul 2022 04:14:38 +0000 https://quickchangetool.com/2022/07/fine-grinded-lathe-40-position-quick-change-tool-post-multifix-size-b-holders/








Multifix type B quick change tool post c. Ed on lathes which turning diameter is from 300mm to 500mm. C06236, MATE360, C6240, Yangzhou Super C6241, C6246, etc. To select a right tool post for your lathe, swing over bed is not the only data to refer. Also need to know your lathe tool top slide width and lathe main motor power. For a light duty bench lathe with 360mm(14) swing and main power less than 3KW, a smaller model E5 might be OK for work. For a middle or heavy. Duty lathe with same 360mm(14) swing and main power more than 3KW, model B2 should be better. Is same as creat ools’. It includes the following. 1x Multifix type B tool post &locking wrench. 3x BD25120 turning facing tool holder. BD25120 can hold 25mm shank(1 tip height) turning tool. 1X BH32130 boring tool holder, (round shank tool holder). 1X T wrench for tool holders. Net weight: 11.5KGS, Gross weight: 12.2KGS. Some tool dealer like optimum toolmaxx name B model as SWH5-B, WB in Europe, etc. We have sales of B in Europe mainly. Now only available to Australia and New Zealand by UBI. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post”. The seller is “sino-sd” and is located in this country: CN. This item can be shipped worldwide.

• Model: B/BD25120/BH32130
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• Featured Refinements: Lathe Tool Post
• Non-Domestic Product: No
• Brand: SINOTECH
• Tool Post Type: Quick Change Tool Post

]]> https://quickchangetool.com/2022/07/fine-grinded-lathe-40-position-quick-change-tool-post-multifix-size-b-holders/feed/ 0