https://quickchangetool.com Thu, 23 Apr 2026 13:43:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://quickchangetool.com/2026/03/40-position-quick-change-tool-post-a1-multifix-size-with-ad2090-ab2090-holder-us/ https://quickchangetool.com/2026/03/40-position-quick-change-tool-post-a1-multifix-size-with-ad2090-ab2090-holder-us/#comments Tue, 31 Mar 2026 00:50:47 +0000 https://quickchangetool.com/2026/03/40-position-quick-change-tool-post-a1-multifix-size-with-ad2090-ab2090-holder-us/





















A1 QUICK CHANGE TOOL POST – MULTIFIX 40 POSITION. A1 For Lathe Swing – 150mm To 300mm Mounting Bore – 20mm (10.2mm) Block Height – 54mm. Standard Holder – 20mm Holding Capacity Boring Holder – 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 3 x Standard Holders (A1D2090) – 20mm Holding Capacity 1 x Boring Holder (AIB2090). 20mm Holding Capacity. 1 x T Wrench. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6″-12″). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws. Tools can be reground without removal form tool holder, so the setting remains unaltered. 40 possible instrument angles can be. Conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post: HRC 50±2 degree after heat-treatment. Tool holder: HRC 42±2 degree after heat-treatment. Knurled metal thumb screw for accurate and secure tool holding. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system. The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characterised by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. SET INCLUDES – 1 MAIN BLOCK +3 STANDARD HOLDERS + 1 BORING HOLDER. Family-run business engaged in the manufacturing & supplying of Engineering Tools & Industrial Supplies for the last 40 years. Comprising of a dedicated & skilled team of engineers with an aim of supplying our clients with products of the highest industrial standards at the most affordable pricing.

]]> https://quickchangetool.com/2026/03/40-position-quick-change-tool-post-a1-multifix-size-with-ad2090-ab2090-holder-us/feed/ 0 https://quickchangetool.com/2026/01/40-position-quick-change-tool-post-set-for-wm210-lathe-with-4-holders-4/ https://quickchangetool.com/2026/01/40-position-quick-change-tool-post-set-for-wm210-lathe-with-4-holders-4/#comments Fri, 09 Jan 2026 23:00:47 +0000 https://quickchangetool.com/2026/01/40-position-quick-change-tool-post-set-for-wm210-lathe-with-4-holders-4/











40 Position Quick Change Tool Post Set for WM210 Lathe with 4 Holders. Aa quick change tool post set the good helper for lathe cessing. It is suitable for. Swing 120-220mm lathe, such as. G0768/ WBL 210 /WM180V/ WM210/. Type Aa Packing list. AaD1250 holder3; AaH1250 holder1. Take away the original square holder. Adjust the center height. Installation is complete, start to use.

]]> https://quickchangetool.com/2026/01/40-position-quick-change-tool-post-set-for-wm210-lathe-with-4-holders-4/feed/ 0 https://quickchangetool.com/2025/12/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-540-100-2/ https://quickchangetool.com/2025/12/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-540-100-2/#comments Tue, 23 Dec 2025 22:17:44 +0000 https://quickchangetool.com/2025/12/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-540-100-2/












A / A1 QUICK CHANGE TOOL POST – MULTIFIX 40 POSITION. A / A1 For Lathe Swing – 150mm To 300mm Mounting Bore – 20mm (10.2mm) Block Height – 54mm. Standard Holder – 20mm Holding Capacity Boring Holder – 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 3 x Standard Holders (A1D2090) – 20mm Holding Capacity 1 x Boring Holder (AIB2090). 20mm Holding Capacity. 1 x T Wrench. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6″-12″). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws. Tools can be reground without removal form tool holder, so the setting remains unaltered. 40 possible instrument angles can be. Conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post: HRC 50±2 degree after heat-treatment. Tool holder: HRC 42±2 degree after heat-treatment. Knurled metal thumb screw for accurate and secure tool holding. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system. The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characterised by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. SET INCLUDES – 1 MAIN BLOCK +3 STANDARD HOLDERS + 1 BORING HOLDER. Family-run business engaged in the manufacturing & supplying of Engineering Tools & Industrial Supplies for the last 40 years. Comprising of a dedicated & skilled team of engineers with an aim of supplying our clients with products of the highest industrial standards at the most affordable pricing.

]]> https://quickchangetool.com/2025/12/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-540-100-2/feed/ 0 https://quickchangetool.com/2025/12/40-position-quick-change-tool-post-a1-multifix-size-a-with-ad2090-ab2090-holder-2/ https://quickchangetool.com/2025/12/40-position-quick-change-tool-post-a1-multifix-size-a-with-ad2090-ab2090-holder-2/#comments Thu, 04 Dec 2025 21:38:44 +0000 https://quickchangetool.com/2025/12/40-position-quick-change-tool-post-a1-multifix-size-a-with-ad2090-ab2090-holder-2/












A / A1 QUICK CHANGE TOOL POST – MULTIFIX 40 POSITION. A / A1 For Lathe Swing – 150mm To 300mm Mounting Bore – 20mm (10.2mm) Block Height – 54mm. Standard Holder – 20mm Holding Capacity Boring Holder – 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 3 x Standard Holders (A1D2090) – 20mm Holding Capacity 1 x Boring Holder (AIB2090). 20mm Holding Capacity. 1 x T Wrench. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6″-12″). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws. Tools can be reground without removal form tool holder, so the setting remains unaltered. 40 possible instrument angles can be. Conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post: HRC 50±2 degree after heat-treatment. Tool holder: HRC 42±2 degree after heat-treatment. Knurled metal thumb screw for accurate and secure tool holding. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system. The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characterised by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. SET INCLUDES – 1 MAIN BLOCK +3 STANDARD HOLDERS + 1 BORING HOLDER. Family-run business engaged in the manufacturing & supplying of Engineering Tools & Industrial Supplies for the last 40 years. Comprising of a dedicated & skilled team of engineers with an aim of supplying our clients with products of the highest industrial standards at the most affordable pricing.

]]> https://quickchangetool.com/2025/12/40-position-quick-change-tool-post-a1-multifix-size-a-with-ad2090-ab2090-holder-2/feed/ 0 https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-a1-multifix-size-a1-with-ad1675-ah2090-holder/ https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-a1-multifix-size-a1-with-ad1675-ah2090-holder/#comments Thu, 30 Oct 2025 19:23:43 +0000 https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-a1-multifix-size-a1-with-ad1675-ah2090-holder/













Germany style 40 Position Q. Canada, USA and some European countries like France, Norway, etc. 4.3KGS/set (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6″–12″), lathe tool top slide width range 75–100mm. On the photo you can see A1 we installed on 210mm swing bench lathe. One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning tool holders AD1675. Can hold 16 MM (16/25″=0.64″) shank turning tool. Can hold tool tip height min. 8 MM (8/25=0.32). 1 X boring tool holder AH2090. 1 X Tool clmaping T wrench. 1 X English operation manual.

]]> https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-a1-multifix-size-a1-with-ad1675-ah2090-holder/feed/ 0 https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120/ https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120/#comments Sat, 25 Oct 2025 19:10:42 +0000 https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120/













Ed on lathes which turning diameter is from 300mm to 500mm. C06236, MATE360, C6240, Yangzhou Super C6241, C6246, etc. Our B2 and holders are made to fit with ORIGINAL MULTIFIX TYPE B made in Switherland. To select a right tool post for your lathe, swing over bed is not the only data to refer. Also need to know your lathe tool top slide width and lathe main motor power. For a light duty bench lathe with 360mm(14) swing and main power less than 3KW, a smaller model E5 might be OK for work. For a middle or heavy. Duty lathe with same 360mm(14) swing and main power more than 3KW, model B2 should be better. This B2 set is a NOT a standanrd kit. Because my store is not allowed to list single listing value more than USD500. I slip one standard kit to 2 listings. It includes the following. 1x B2 multifix tool post &locking wrench. 3x BD25120 turning tool holder. BD25120 can hold 25mm shank(1 tip height) turning tool. 0 X BB32130 boring turning tool holder, This boring tool holder is with small V notch. It can be used as turning tool holder too. If Customer needs a whole kit, You need to place 2 orders to my store. This listing and another listing for one BB32130. 1X T wrench for tool holders. Net weight: 11.6-1.8KGS, Gross weight: 12.3-1.8 KGS. By ocean we mainly have sales of B2 in Canada. Now only available to Australia and New Zealand by UBI.

]]> https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120/feed/ 0 https://quickchangetool.com/2025/08/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-540-100/ https://quickchangetool.com/2025/08/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-540-100/#comments Thu, 14 Aug 2025 04:43:43 +0000 https://quickchangetool.com/2025/08/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-540-100/












A / A1 QUICK CHANGE TOOL POST – MULTIFIX 40 POSITION. A / A1 For Lathe Swing – 150mm To 300mm Mounting Bore – 20mm (10.2mm) Block Height – 54mm. Standard Holder – 20mm Holding Capacity Boring Holder – 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 3 x Standard Holders (A1D2090) – 20mm Holding Capacity 1 x Boring Holder (AIB2090). 20mm Holding Capacity. 1 x T Wrench. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6″-12″). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws. Tools can be reground without removal form tool holder, so the setting remains unaltered. 40 possible instrument angles can be. Conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post: HRC 50±2 degree after heat-treatment. Tool holder: HRC 42±2 degree after heat-treatment. Knurled metal thumb screw for accurate and secure tool holding. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system. The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characterised by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. SET INCLUDES – 1 MAIN BLOCK +3 STANDARD HOLDERS + 1 BORING HOLDER. Family-run business engaged in the manufacturing & supplying of Engineering Tools & Industrial Supplies for the last 40 years. Comprising of a dedicated & skilled team of engineers with an aim of supplying our clients with products of the highest industrial standards at the most affordable pricing.

]]> https://quickchangetool.com/2025/08/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-540-100/feed/ 0 https://quickchangetool.com/2025/08/40-position-quick-change-tool-post-a1-multifix-size-a-with-ad2090-ab2090-holder/ https://quickchangetool.com/2025/08/40-position-quick-change-tool-post-a1-multifix-size-a-with-ad2090-ab2090-holder/#comments Fri, 01 Aug 2025 16:18:42 +0000 https://quickchangetool.com/2025/08/40-position-quick-change-tool-post-a1-multifix-size-a-with-ad2090-ab2090-holder/












A / A1 QUICK CHANGE TOOL POST – MULTIFIX 40 POSITION. A / A1 For Lathe Swing – 150mm To 300mm Mounting Bore – 20mm (10.2mm) Block Height – 54mm. Standard Holder – 20mm Holding Capacity Boring Holder – 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 3 x Standard Holders (A1D2090) – 20mm Holding Capacity 1 x Boring Holder (AIB2090). 20mm Holding Capacity. 1 x T Wrench. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6″-12″). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws. Tools can be reground without removal form tool holder, so the setting remains unaltered. 40 possible instrument angles can be. Conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post: HRC 50±2 degree after heat-treatment. Tool holder: HRC 42±2 degree after heat-treatment. Knurled metal thumb screw for accurate and secure tool holding. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system. The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characterised by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. SET INCLUDES – 1 MAIN BLOCK +3 STANDARD HOLDERS + 1 BORING HOLDER. Family-run business engaged in the manufacturing & supplying of Engineering Tools & Industrial Supplies for the last 40 years. Comprising of a dedicated & skilled team of engineers with an aim of supplying our clients with products of the highest industrial standards at the most affordable pricing.

]]> https://quickchangetool.com/2025/08/40-position-quick-change-tool-post-a1-multifix-size-a-with-ad2090-ab2090-holder/feed/ 0 https://quickchangetool.com/2025/07/40-position-quick-change-tool-post-ab-multifix-turning-boring-parting-off-holder-2/ https://quickchangetool.com/2025/07/40-position-quick-change-tool-post-ab-multifix-turning-boring-parting-off-holder-2/#comments Wed, 23 Jul 2025 15:59:43 +0000 https://quickchangetool.com/2025/07/40-position-quick-change-tool-post-ab-multifix-turning-boring-parting-off-holder-2/



















Germany style 40 Position Q. Ab is a model between AA and A1. Ab is bigger than AA but smaller than A1. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 180 to 330mm(7″–13″), lathe tool top slide width range 75–100mm. One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning tool holders AbD1665. Can hold 16 MM (16/25″=0.64″) shank turning tool. Can hold tool tip height min. 8 MM (8/25=0.32). 1 X boring tool round tool holder AbH1665. 1 X Tool clmaping T wrench. 1 X English operation manual. 1 X 16X20X80MM Parting Off blade Holder. 1 X 2X12X200MM High speed steel Parting off blade. Gross weight: 3.1KGS. Have sales in USA, France, Sweden, etc.

]]> https://quickchangetool.com/2025/07/40-position-quick-change-tool-post-ab-multifix-turning-boring-parting-off-holder-2/feed/ 0 https://quickchangetool.com/2025/04/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-in-us-2/ https://quickchangetool.com/2025/04/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-in-us-2/#comments Wed, 23 Apr 2025 11:23:41 +0000 https://quickchangetool.com/2025/04/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-in-us-2/












Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6″-12″). One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning facing tool holders A1D2090. Can hold 20 MM (20/25″=0.8″) shank turning tool. Will hold tool 8mm to 20mm. 1 X boring turning facing tool holder A1B2090. 1 X Tool Clamping T wrench. The spline of the tool holders are EDM cut, not fine ground. Canada, USA and some European countries like France, Norway, etc. PLEASE REFER TO DIAGRAM IN PICTURE MODEL NAME- A1(540-100) D20. Cam-lock handle rigidity locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws 3. Tools can be reground without removal form tool holder so the setting remains unaltered 4. 40 different angles are conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post:HRC 50±2 degree after heat-treatment. Toolholder:HRC 42±2 degree after heat-treatment. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characteried by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. Includes 3 standard holders & one boring holde. CONTENTS- THIS SET CONSISTS OF ONE MAIN BLOCK, 3 STANDARD HOLDER, 1 BORING HOLDER AND HANDLE SUITABLE WITH TOOLPOST.

]]> https://quickchangetool.com/2025/04/40-position-quick-change-tool-post-multifix-a1-with-ad2090-ab2090-holder-in-us-2/feed/ 0