https://quickchangetool.com Sun, 30 Aug 2026 08:45:58 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://quickchangetool.com/2026/06/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120-bb32130/ https://quickchangetool.com/2026/06/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120-bb32130/#comments Tue, 02 Jun 2026 04:37:44 +0000 https://quickchangetool.com/2026/06/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120-bb32130/







You may also like. 40 Position Quick Change Tool Post Kit Multifix Size B2/B with BD25120 BB32130. Ed on lathes which turning diameter is from 300mm to 500mm. C06236, MATE360, C6240, Yangzhou Super C6241, C6246, etc. Our B2 and holders are made to fit with ORIGINAL MULTIFIX TYPE B made in Switherland. To select a right tool post for your lathe, swing over bed is not the only data to refer. Also need to know your lathe tool top slide width and lathe main motor power. For a light duty bench lathe with 360mm(14) swing and main power less than 3KW, a smaller model E5 might be OK for work. For a middle or heavy. Duty lathe with same 360mm(14) swing and main power more than 3KW, model B2 should be better. This B2 set is a standanrd kit. It includes the following. 1x B2 multifix tool post &locking wrench. 3x BD25120 turning tool holder. BD25120 can hold 25mm shank(1 tip height) turning tool. 1X BB32130 boring turning tool holder, This boring tool holder is with small V notch. It can be used as turning tool holder too. 1X T wrench for tool holders. Net weight: 11.6KGS, Gross weight: 12.3KGS. Because of the different time zone, please give us some time, all the emails will be answered within 24 hours. Thanks for your understand and support! We will provide you with the most satisfactory solution. We can provide you with value discounts and more efficient and faster transportation. In the event that you receive the item is not in the standards above. Good communication helps buyers and sellers to solve any problems. We will be glad to work together and provide a satisfying solution. PaymentShippingReturn policyAbout usContact us.

]]> https://quickchangetool.com/2026/06/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120-bb32130/feed/ 0 https://quickchangetool.com/2026/01/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311-3/ https://quickchangetool.com/2026/01/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311-3/#comments Thu, 08 Jan 2026 22:58:53 +0000 https://quickchangetool.com/2026/01/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311-3/







Turning Tool Holder BD25120 for B2/B Type 40-position Multifix Quick Change Lathe Tool Post. Price includes 4 pieces of BD25120 tool holders. Parameters of Square Turning Tool Holder. Can hold tool tip height up to 25mm (0.98) max. Net weight per piece: 1.7kg / Gross weight for 4 pieces: 7.1kg. Otherwise, we will not be able to send the package. Examples of such countries include South Africa, Chile, Peru, Mexico, South Korea, etc. We will solve the problem for you.

]]> https://quickchangetool.com/2026/01/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311-3/feed/ 0 https://quickchangetool.com/2025/12/6-pcs-bd25120-turning-tool-holder-4-b2-b-multifix-quick-change-tool-post-540-311/ https://quickchangetool.com/2025/12/6-pcs-bd25120-turning-tool-holder-4-b2-b-multifix-quick-change-tool-post-540-311/#comments Fri, 12 Dec 2025 21:55:43 +0000 https://quickchangetool.com/2025/12/6-pcs-bd25120-turning-tool-holder-4-b2-b-multifix-quick-change-tool-post-540-311/











Ool Holder BD25120 for. 40 position Multifix type Quick Change Lathe Tool Post. Our B2 and holders are made to fit with ORIGINAL MULTIFIX TYPE B made in Switherland. 6 PCS BD25120 tool holders (Not include the turning tool in photo). Can hold tool tip height to 25mm 0.98 max. The spline of this holder is cut by EDM, not fine ground. This BD25120 can fit with any brands of B or B2 tool post. W 10.8 KGS/G. This turning tool holder is about the best sales model in all our quick change tool holders. So usually we have stock at least 100PCS. We have sales of this model turning tool holder in Canada, France, Norway, Israel, Germany, US.

]]> https://quickchangetool.com/2025/12/6-pcs-bd25120-turning-tool-holder-4-b2-b-multifix-quick-change-tool-post-540-311/feed/ 0 https://quickchangetool.com/2025/11/6pcs-fine-ground-bd25120-turning-tool-holder-4-b-multifix-quick-change-tool-post/ https://quickchangetool.com/2025/11/6pcs-fine-ground-bd25120-turning-tool-holder-4-b-multifix-quick-change-tool-post/#comments Wed, 05 Nov 2025 08:34:52 +0000 https://quickchangetool.com/2025/11/6pcs-fine-ground-bd25120-turning-tool-holder-4-b-multifix-quick-change-tool-post/
















Ool Holder BD25120 for. 40 position Multifix type Quick Change Lathe Tool Post. 6 PCS BD25120 tool holder. Packed in yellow carton. Can hold tool tip height to 25mm 0.98 max. 1.7KGS/PC Net weight. Gross weight: 10.6 KGS. The teeth parts is fine ground. Not by EDM cut. On the photo i compared BD25120 and B2D25120. Fine ground BD25120/BD32120 can fit on B multifix tool post well. But may be tight to fit on B2 multifix tool post. If your B tool post is with brands like Optim um, Topt ech. Fine ground BD25120/BD32120 can fit on them very well. If your B tool. Post is with brand like. Fine ground BD25120/BD32120 might be very tight to fit on. And we don’t suggest this model. So before or after you place order, please confirm your B tool post brand. (total weight less than 2KGS). (total weight more than 2KGS). We have sales of this model turning tool holder in Canada, France, Norway, Israel, Germany, US, Australia, etc.

]]> https://quickchangetool.com/2025/11/6pcs-fine-ground-bd25120-turning-tool-holder-4-b-multifix-quick-change-tool-post/feed/ 0 https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120/ https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120/#comments Sat, 25 Oct 2025 19:10:42 +0000 https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120/













Ed on lathes which turning diameter is from 300mm to 500mm. C06236, MATE360, C6240, Yangzhou Super C6241, C6246, etc. Our B2 and holders are made to fit with ORIGINAL MULTIFIX TYPE B made in Switherland. To select a right tool post for your lathe, swing over bed is not the only data to refer. Also need to know your lathe tool top slide width and lathe main motor power. For a light duty bench lathe with 360mm(14) swing and main power less than 3KW, a smaller model E5 might be OK for work. For a middle or heavy. Duty lathe with same 360mm(14) swing and main power more than 3KW, model B2 should be better. This B2 set is a NOT a standanrd kit. Because my store is not allowed to list single listing value more than USD500. I slip one standard kit to 2 listings. It includes the following. 1x B2 multifix tool post &locking wrench. 3x BD25120 turning tool holder. BD25120 can hold 25mm shank(1 tip height) turning tool. 0 X BB32130 boring turning tool holder, This boring tool holder is with small V notch. It can be used as turning tool holder too. If Customer needs a whole kit, You need to place 2 orders to my store. This listing and another listing for one BB32130. 1X T wrench for tool holders. Net weight: 11.6-1.8KGS, Gross weight: 12.3-1.8 KGS. By ocean we mainly have sales of B2 in Canada. Now only available to Australia and New Zealand by UBI.

]]> https://quickchangetool.com/2025/10/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120/feed/ 0 https://quickchangetool.com/2025/01/3pcs-fine-ground-bd25120-turning-tool-holder-4-b-multifix-quick-change-tool-post/ https://quickchangetool.com/2025/01/3pcs-fine-ground-bd25120-turning-tool-holder-4-b-multifix-quick-change-tool-post/#comments Wed, 22 Jan 2025 08:14:21 +0000 https://quickchangetool.com/2025/01/3pcs-fine-ground-bd25120-turning-tool-holder-4-b-multifix-quick-change-tool-post/
















Ool Holder BD25120 for. 40 position Multifix type Quick Change Lathe Tool Post. 3 PCS BD25120 tool holder. Packed in yellow carton. Can hold tool tip height to 25mm 0.98 max. 1.7KGS/PC Net weight. Gross weight: 5.3KGS. The teeth parts is fine ground. Not by EDM cut. On the photo i compared BD25120 and B2D25120. (total weight less than 2KGS). (total weight more than 2KGS). We have sales of this model turning tool holder in Canada, France, Norway, Israel, Germany, US, Australia, etc.

]]> https://quickchangetool.com/2025/01/3pcs-fine-ground-bd25120-turning-tool-holder-4-b-multifix-quick-change-tool-post/feed/ 0 https://quickchangetool.com/2024/10/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311-2/ https://quickchangetool.com/2024/10/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311-2/#comments Wed, 09 Oct 2024 20:40:16 +0000 https://quickchangetool.com/2024/10/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311-2/










We are not responsible for undeliverable address. Dear friend, your happy is very important to me! . We stand behind every product we sell. You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here. We will be happy to assist you. We would try our best to serve you with any question / problem.

]]> https://quickchangetool.com/2024/10/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311-2/feed/ 0 https://quickchangetool.com/2024/08/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311/ https://quickchangetool.com/2024/08/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311/#comments Wed, 14 Aug 2024 15:25:57 +0000 https://quickchangetool.com/2024/08/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311/










Ool Holder BD25120 for. 40 position Multifix type Quick Change Lathe Tool Post. 4 PCS BD25120 tool holder(Not include the turning tool in photo). Can hold tool tip height to 25mm 0.98 max. This turning tool holder is about the best sales model in all our quick change tool holders. So usually we have stock at least 100PCS. 1.7KGS/PC Net weight/PC Gross weight is 7.1 KGS. (total weight less than 2KGS). (total weight more than 2KGS). We have sales of this model turning tool holder in Canada, France, Norway, Israel, Germany, US, Australia, etc.

]]> https://quickchangetool.com/2024/08/4-pcs-bd25120-turning-tool-holder-for-b2-multifix-quick-change-tool-post-540-311/feed/ 0 https://quickchangetool.com/2021/12/bd25120-bd32120-turning-tool-holder-for-b2-or-b-multifix-quick-change-tool-post/ https://quickchangetool.com/2021/12/bd25120-bd32120-turning-tool-holder-for-b2-or-b-multifix-quick-change-tool-post/#comments Fri, 10 Dec 2021 05:51:35 +0000 https://quickchangetool.com/2021/12/bd25120-bd32120-turning-tool-holder-for-b2-or-b-multifix-quick-change-tool-post/












Ool Holder BD25120 BD32120 for. 40 position Multifix type Quick Change Lathe Tool Post. 1 PC BD25120 and 1 PC BD32120 tool holders (Not include the turning tool in photo). One can hold tool shank max. Height to 25mm 1 max. Height to 32mm 1.26 max. We have sales of this model turning tool holders in Canada, France, Norway, Israel, Germany, US. The item “BD25120 BD32120 Turning Tool Holder For B2 Or B Multifix Quick Change Tool Post” is in sale since Saturday, August 29, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post”. The seller is “sino-sd” and is located in Jinan, Shandong . This item can be shipped worldwide.

• Model: 1 X BD25120 1 X BD32120
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• Featured Refinements: Lathe Tool Post
• MPN: Does Not Apply
• Brand: SINOTECH
• Tool Post Type: Quick Change Tool Post

]]> https://quickchangetool.com/2021/12/bd25120-bd32120-turning-tool-holder-for-b2-or-b-multifix-quick-change-tool-post/feed/ 0 https://quickchangetool.com/2021/09/2-pcs-bd25120-turning-tool-holder-4-b2-b-multifix-quick-change-tool-post-540-311/ https://quickchangetool.com/2021/09/2-pcs-bd25120-turning-tool-holder-4-b2-b-multifix-quick-change-tool-post-540-311/#comments Fri, 17 Sep 2021 02:32:18 +0000 http://quickchangetool.com/2021/09/2-pcs-bd25120-turning-tool-holder-4-b2-b-multifix-quick-change-tool-post-540-311/










Ool Holder BD25120 for. 40 position Multifix type Quick Change Lathe Tool Post. 2 PCS BD25120 tool holders (Not include the turning tool in photo). Can hold tool tip height to 25mm 0.98 max. This turning tool holder is about the best sales model in all our quick change tool holders. So usually we have stock at least 100PCS. For the full Kit & other types. Of holders are also available. We have sales of this model turning tool holder in Canada, France, Norway, Israel, Germany, US. The item “2 PCS BD25120 Turning Tool Holder 4 B2 B Multifix Quick Change Tool Post 540-311″ is in sale since Thursday, August 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post”. The seller is “sino-sd” and is located in Jinan, Shandong . This item can be shipped worldwide.

• Model: 2 X BD25120
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• Featured Refinements: Lathe Tool Post
• MPN: Does Not Apply
• Brand: SINOTECH
• Tool Post Type: Quick Change Tool Post

]]> https://quickchangetool.com/2021/09/2-pcs-bd25120-turning-tool-holder-4-b2-b-multifix-quick-change-tool-post-540-311/feed/ 0