https://quickchangetool.com Fri, 17 Apr 2026 13:30:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://quickchangetool.com/2019/01/shop-fox-m1112-gunsmith-lathe-with-stand-quick-change-gearbox-0-0011r-feed-rt/ https://quickchangetool.com/2019/01/shop-fox-m1112-gunsmith-lathe-with-stand-quick-change-gearbox-0-0011r-feed-rt/#comments Mon, 21 Jan 2019 15:53:39 +0000 http://quickchangetool.com/2019/01/shop-fox-m1112-gunsmith-lathe-with-stand-quick-change-gearbox-0-0011r-feed-rt/








Shop Fox M1112 Gunsmith Lathe w/ Stand, Quick Change Gearbox & 0.0011/R Feed Rt. This superb gearhead lathe is in the bull’s eye with its high-tolerance bearings, D1-5 camlock spindle, outboard spindle bore supports, quick change gearbox, induction-hardened bed ways, and its extra fine longitudinal feed rate of 0.0011″/r and cross feed rate of 0.0004″/r. Other features include a heavy-duty vibration dampening stand, ball bearing tipped follow rest and steady rest, and a tailstock that can be tightened with a torque wrench to maintain precision chuck-to-tailstock alignment every time the tailstock is locked down. Even if you are not a gunsmith, you’ll appreciate all the precision and features this lathe offers. 2HP, 220v, Single-Phase, 1725 RPM. Removable gap bed allows turnings up to 17 in diameter. Cuts 4-112 Standard TPI and. Ball Bearing Steady/Follow Rests. Heavy Duty Stand with Extended Base. Cast Aluminum Gear Cover. Quick Change Tool Post. Ground Gears & High Precision Bearings. Hardened & Ground V-Ways. What’s in The Box. Shop Fox M1112 12-Inch by 36-Inch Gunsmithing Lathe. 6-Inch 3-Jaw chuck with two sets of jaws. 8-Inch 4-Jaw chuck with reversible jaws. Set of six change gears. 1/2-Inch chuck w/ MT3 arbor. 30 Day Satisfaction Guaranteed. 1-5/8-Inch, D1-5 Camlock Mount. 70, 200, 220, 270, 360, 600, 800, 1000 and 1400 RPM. 66 x 50 x 30. SECURE & HASSLE FREE SHOPPING. All our sales are backed by a 30-Day Satisfaction Guarantee. Products shown as available are normally stocked but inventory levels cannot be guaranteed. The item “Shop Fox M1112 Gunsmith Lathe with Stand, Quick Change Gearbox & 0.0011/R Feed Rt” is in sale since Monday, October 8, 2018. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Lathes & Accessories”. The seller is “maxtoolsales” and is located in Ontario, California. This item can be shipped to United States.

• Brand: SHOP FOX
• MPN: M1112
• Model: M1112

]]> https://quickchangetool.com/2019/01/shop-fox-m1112-gunsmith-lathe-with-stand-quick-change-gearbox-0-0011r-feed-rt/feed/ 0 https://quickchangetool.com/2018/06/pm1440gs-gunsmith-metal-lathe-2-spindle-bore-2axis-dro-quick-change-tool-post/ https://quickchangetool.com/2018/06/pm1440gs-gunsmith-metal-lathe-2-spindle-bore-2axis-dro-quick-change-tool-post/#comments Tue, 26 Jun 2018 07:19:34 +0000 http://quickchangetool.com/2018/06/pm1440gs-gunsmith-metal-lathe-2-spindle-bore-2axis-dro-quick-change-tool-post/







2 SPINDLE BORE, QUICK CHANGE TOOL POST, AND 2 -AXIS DIGITAL READOUT INSTALLED! High Precision Japanese NSK Tapered Roller Bearings used in spindle, for the ultimate in long life, high precision, and best surface finishes. 4-bolt Centering Provision (Known as a Spider) Included at outboard end of spindle, great for through spindle work, such as Gunsmithing or. Support other long parts that extend through the spindle bore. Standard 3 jaw chuck has reversible bolt on jaws, for faster changing from O. D1-5 CAMLOCK SPINDLE MOUNT, with LARGE 2 Spindle Bore, Best in class for universal chuck mounting, and the ability to accept larger. Diameter work that can pass through the spindle for much easier setup. Excellent value for the price, includes many of the accessories people eventually add, such as the Wedge Type Quick Change Tool post Set. Work Light, and more at no additional charge, pre-installed on the machine and ready to use. Hardened and Ground gears and shafts in headstock for longer life. Power feed on Carriage, and Cross Slide, both left and right, and in and out, for both turning and facing operations with automatic feed. Allows for the best surface finish in all directions. 3 HP Single Phase motor, no need for any special power source, will run from standard 220V Single Phase Outlet. Rigid Cast Iron Base Construction, for deeper cuts, and more vibration dampening. Induction Hardened and Precision Ground Bed Ways to resist wear and give a long service life. High quality electronics used throughout machine. Slip Clutch on feed rod, to help prevent overloading damage of feeds and allow the use of a solid carriage stop for repetitive work. Inch AND Metric thread cutting ability is a standard. Minimal Change Gears needed for Inch threading, only 2 changes required for the full Inch threading range, one set covers 4-14 TPI, and the other. Set will cover the 16-112 TPI Range. Most gunsmithing work is covered in the 16-112 TPI Range, so normally, gear changes will not be required at. TRUE INCH PITCH main lead screw is 8 TPI, cross feed, tailstock, and compound slide lead screws are 10 TPI, which make it easier to use for the. Splash oil bath lubrication in Thread/Feed Gearbox, and Apron, for efficient lubrication, and long life, especially compared to traditional open-non lubricated Thread/Feed Gearbox design, yet simple and reliable, and does not require any filter changes or pump maintenance as with oil pump lubrication systems. Also no risk of losing oil flow to expensive parts as there can be with pump lubricated systems. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Spindle Spider (For gunsmithing work). 2 axis DRO, Installed on machine. WEDGE Type Quick Change Tool Post, With 5 Holders. 8 3 Jaw Chuck w/ 2 Pc Jaws. 8 4 Jaw Chuck. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Swing over bed 14. Swing over cross slide 8.77. Swing in gap 19.75. Spindle Center Line Distance from Floor Approx. Distance Between Centers 40. Spindle Chuck Mount D1-5, Camlock. Spindle Face to Tail Stock Spindle Face Max Distance 43-1/4. Width of Bed 7.362. Bed Height 11.5. Spindle Taper, Internal MT #6. Spindle Mounting System Camlock, D1-5. Spindle Speeds 60-1800RPM, 8 Steps. Lead Screw Diameter / Pitch 7/8 / 8 TPI. Feed Rod Diameter 3/4. Inch Thread Cutting Range 4-112 TPI, List: 4, 4.5, 5, 5.5, 5.75, 6, 6.5, 7. 8, 9, 9.5, 10, 11, 11.5, 12, 13, 14, 16, 18, 20, 22, 23, 24, 26, 28, 32, 36, 38, 40, 44, 46, 48, 52, 56, 64, 72, 80, 86,92, 96, 104, 112. Metric Thread Cutting Range. Longitudinal Feed Range (Left and Right). 0016.117 Inches Per Revolution. Cross Feed Range (In and Out). 0005.032 Inches Per Revolution. Spindle Length through headstock, Protruding End to Chuck Mounting face Approx. Spindle Length through headstock, End to 3 Jaw Chuck face Approx. Max Carriage Travel, Along Bed Ways 38-1/2. Cross Slide Travel 7. Tail Stock Quill Diameter 1.259. Tail Stock Quill Taper MT #4. Tail Stock Quill Travel 4. Main Motor Horsepower 3HP. Speed Control Type Gear Shift Levers. Voltage / Phase/ Amps 220 Volts +/- 10%, 1 Phase / 12 Amps Max. Dimensions, Assembled (Includes cross slide handles) 51H x 31W x 71-1/2L. Foot Print (without Handles Included) 71-1/2L x 24 Front of chip pan to back of splash guard. Approximate Machine Weight, With Accessories and Base 1800 LBS (Cast Iron Base). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM1440GS GUNSMITH METAL LATHE, 2 SPINDLE BORE 2AXIS DRO, QUICK CHANGE TOOL POST” is in sale since Wednesday, June 13, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Lathe”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Model: PM-1440GS w/DRO
• Country/Region of Manufacture: China
• MPN: PM-1440GS w/DRO
• Brand: Precision Matthews

]]> https://quickchangetool.com/2018/06/pm1440gs-gunsmith-metal-lathe-2-spindle-bore-2axis-dro-quick-change-tool-post/feed/ 0