Suitable for lathe center height 0.7 – 2.2″ (Top compound surface to lathe center line), such as: South Bend 13″, 14″ & 1307, Delta 14″, Logan 14″ Emco: Elnomat13S, Harrison: 11,12 &13″, Sheldon: 11 &13, Clausing: 1300 series, Monarch: 13, Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each […]
Aloris AXA-19 Adjustable Knurling Tool Holder 2 Max – Quick Change.
USED, ENCO MODEL E3 TURRET. IT COMES WITH ONE HOLDER. THERE ARE MEASUREMENTS IN THE PICTURES. THE BLOCK LOCKS DOWN LIKE IT SHOULD. THERE ARE SCUFFS AND SCRATCHES FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values […]
Description: Quick Change Turning and Facing Lathes Tool Post Holder Use for lathe swing 10-15″ piston Type or wedge type tool posts sets 250-201T Oversize Turning Tool Holders, use tool bit up to 3/4″ Plenty of working positions for more tool holder. Adjust height of cutting edge easily and accurately. For manual and CNC-lathe. Holder […]
Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ALL-CARB 5× CXA #4 250-304 Heavy Quick Change Tool Post Boring Bar Holder 13-18. CXA #4 QUICK CHANGE BORING BAR TOOL POST 250-304. For use with CXA tool posts 250-300 or […]
Description: BRAND NEW CXA #4 QUICK CHANGE BORING BAR TOOL POST 250-304 For use with CXA tool posts 250-300 or 250-333. 13-18 swing Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4″ tool with bushing, 1″ diameter without bushing Interchangeable with Dorian, Aloris, & Phase II CXA series tool […]
Used – Fairly Good Condition. Quick Change Tool Holder CA-4 1-1/4″ Boring Bar Holder w/16-1/2″ Long Bar.
Description: BRAND NEW CXA #4 QUICK CHANGE BORING BAR TOOL POST 250-304 For use with CXA tool posts 250-300 or 250-333. 13-18 swing Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4″ tool with bushing, 1″ diameter without bushing Interchangeable with Dorian, Aloris, & Phase II CXA series tool […]
Ed on lathes which turning diameter is from 300mm to 500mm. C06236, MATE360, C6240, Yangzhou Super C6241, C6246, etc. To select a right tool post for your lathe, swing over bed is not the only data to refer. Also need to know your lathe tool top slide width and lathe main motor power. For a […]
Swiftray Theme Powered by WordPress
