https://quickchangetool.com Fri, 24 Jul 2026 07:10:17 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://quickchangetool.com/2026/07/findmall-ca-250-444-wedge-quick-change-tool-post-set-for-14-20-inch-lathe-cnc-2/ https://quickchangetool.com/2026/07/findmall-ca-250-444-wedge-quick-change-tool-post-set-for-14-20-inch-lathe-cnc-2/#comments Wed, 22 Jul 2026 19:05:52 +0000 https://quickchangetool.com/2026/07/findmall-ca-250-444-wedge-quick-change-tool-post-set-for-14-20-inch-lathe-cnc-2/

























CA 250-444 Wedge Quick Change Tool Post Set for 14-20 Inch Lathe CNC. QUICK CHANGE TOOL POST CATEGORY Quick Change Tool Post Sets. QUICK CHANGE TOOL POST SERIES CA. QUICK CHANGE TOOL POST TYPE Wedge. NUMBER OF PIECES 6. HEX KEY SIZE 1/4. SET SCREW THREAD SIZE M12x32. 250-444 Wedge Type Tool Post. Lathe Swing: 14″-20″. Includes: 250-444 tool post holder, 250-401 holder, 250-402 holder, 250-404 holder, 250-407 holder, 250-410 holder. Hex Key Size: 1/4. Set Screw Thread Size: M12x32. Findmall CA 250-444 Wedge Quick Change Tool Post Set for 14-20 Inch Lathe CNC. 250-401 Turning Tool Holder, use tool bit 1/2 to 1. 250-402 Boring, Turning Tool Holder, use tool bit up to 1″ and round shank boring bars up to 13/16″. 250-404 Heavy Duty Boring Bar Holder, can use both 1 and 1-1/4 shank boring bars. 250-407 Parting Blade Tool Holder, use 7/8 high parting blades. 250-410 Knurling and Turning Tool Holder, use short tool bit 1/2 to 1. 14-20 CNC Lathe CA Wedge Quick Change Tool Post Set 250-444. Quick Change Tool Post. QUICK CHANGE TOOL POST SERIES. QUICK CHANGE TOOL POST TYPE. SET SCREW THREAD SIZE. If there is any fault or problem with the product, please don’t be shy to express it, we will solve it at the first time. Electric Motor & Pump. Findmall AVR SE350 Automatic Voltage Regulator For Generator Electric Controller. 10 Pair 1/8″ Steel Parallel Set 0.0002″ Hardened 1/8″ x 6″ Suit Milling Thin New. Replacement AVR SX460 Automatic Voltage Volt Regulator For Stamford Generator. Findmall 6 Ton Hydraulic Crimper Crimping Tool Wire Battery Cable Lug Terminal. Findmall 50 Feet Mini Split Installation Kit – 1/4″ & 3/8″ Copper Line Set. 17 Pack 1-1/16″ 5C Round Collet Set By 16th Harden 0006″ TIR High Precision. Findmall CAT40 Hydraulic End Mill Holder 3/4″ 3.20″ Gage Length G2.5/25000RPM. Findmall Keyed Drill Chuck in Prime Quality with R8 Shank & Key 1/8″- 5/8″. Findmall 6 Inch Gate Caster Wheel 700lbs Capacity 360 Degree Rotation (Red). Findmall 5 Semi-Machined Back Plate D1-4 for Plain Back Lathe Chuck. Metal Cut Off Wheels. Engines & Engine Parts.

]]> https://quickchangetool.com/2026/07/findmall-ca-250-444-wedge-quick-change-tool-post-set-for-14-20-inch-lathe-cnc-2/feed/ 0 https://quickchangetool.com/2026/07/quick-change-tool-post-set-13pc-t37-ml7-lathe-90-115mm-centre-height-heavy-duty/ https://quickchangetool.com/2026/07/quick-change-tool-post-set-13pc-t37-ml7-lathe-90-115mm-centre-height-heavy-duty/#comments Tue, 21 Jul 2026 19:01:21 +0000 https://quickchangetool.com/2026/07/quick-change-tool-post-set-13pc-t37-ml7-lathe-90-115mm-centre-height-heavy-duty/




Upgrade your lathe with this Premium Quality T37 Quick Change Tool Post Set, designed for fast, accurate, and repeatable tool changes. Manufactured from high-quality hardened steel with precision-ground components, this tool post delivers exceptional rigidity, accuracy, and long service life for professional workshops, machine shops, and home engineers. The quick-change design minimizes setup time while maintaining precise tool positioning, making it ideal for turning, facing, boring, threading, and parting operations. Premium quality T37 Quick Change Tool Post Set. Suitable for ML7 and similar centre lathes. Centre Height: 90-115 mm. Hardened and precision-ground components. Fast and accurate tool changes. Heavy-duty construction for long-lasting performance. High machining accuracy and repeatability. Supplied in a durable wooden storage box. Main Block Size: 58 × 58 × 37 mm. Stud Bore: 11.5 mm Approx. Tool Capacity: Up to 13 mm. Suitable for 5/16″ (8 mm) and 3/8″ (10 mm) square lathe tools. Larger tools are not recommended as the correct centre height cannot be achieved. 1 × T37 Quick Change Tool Post. 10 × Standard Tool Holders. 1 × Boring Vee Holder. 1 × Parting Tool Holder. 1 × HSS Parting Blade. 1 × Hex Spanner. 1 × Allen Key. 1 × Wooden Storage Box. Total: 13 Piece Set. Professional & DIY Workshops. Why Choose This Tool Post? Quick tool changes reduce setup time. Precision-ground components improve machining accuracy. Hardened steel construction ensures durability. Reliable clamping for consistent performance. Manufactured to high engineering standards. Proudly Made in India. Our products are built to deliver exceptional quality, accuracy, durability, and reliable performance for professionals worldwide.

]]> https://quickchangetool.com/2026/07/quick-change-tool-post-set-13pc-t37-ml7-lathe-90-115mm-centre-height-heavy-duty/feed/ 0 https://quickchangetool.com/2026/07/4-pcs-250-201t-bxa-oversize-34-turning-quick-change-tool-post-holder-lathe/ https://quickchangetool.com/2026/07/4-pcs-250-201t-bxa-oversize-34-turning-quick-change-tool-post-holder-lathe/#comments Mon, 20 Jul 2026 18:58:03 +0000 https://quickchangetool.com/2026/07/4-pcs-250-201t-bxa-oversize-34-turning-quick-change-tool-post-holder-lathe/











4 Pcs 250-201T BXA Oversize 3/4 Inch Turning Tool Post Holder. Set of 4 oversize 3/4 inch turning tool post holders for lathe machines, ensuring secure and precise tool changes. Includes four durable 250-201T BXA tool post holders. Designed for quick and easy tool changes on lathes. Oversize 3/4 inch holders fit standard lathe tool posts. Enhances machining accuracy and operational efficiency. Aftermarket parts, not OEM, for cost-effective replacement. Compatibility may vary depending on the machine’s serial number. Keywords: 250-201T BXA tool post holder set, oversize 3/4 inch lathe holders, quick change lathe tool holders, aftermarket lathe tool posts, turning tool post holders, lathe tool post replacement parts.

]]> https://quickchangetool.com/2026/07/4-pcs-250-201t-bxa-oversize-34-turning-quick-change-tool-post-holder-lathe/feed/ 0 https://quickchangetool.com/2026/07/3-kdk-metal-lathe-quick-change-tool-holders-155-152-and-205-boring-bar-holder/ https://quickchangetool.com/2026/07/3-kdk-metal-lathe-quick-change-tool-holders-155-152-and-205-boring-bar-holder/#comments Mon, 20 Jul 2026 06:56:18 +0000 https://quickchangetool.com/2026/07/3-kdk-metal-lathe-quick-change-tool-holders-155-152-and-205-boring-bar-holder/























USED, KDK TOOL HOLDERS. NO CRACKS OR REPAIRS. A COUPLE OF THE SET SCREWS ARE MISSING. THE LISTING IS FOR ALL 3 HOLDERS. THERE ARE SOME MEASUREMENTS IN THE PICTURES. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

]]> https://quickchangetool.com/2026/07/3-kdk-metal-lathe-quick-change-tool-holders-155-152-and-205-boring-bar-holder/feed/ 0 https://quickchangetool.com/2026/07/vtg-armstrong-quick-change-tool-holder-post-81-023-made-usa-lathe-cnc-machinist-2/ https://quickchangetool.com/2026/07/vtg-armstrong-quick-change-tool-holder-post-81-023-made-usa-lathe-cnc-machinist-2/#comments Sat, 18 Jul 2026 06:51:42 +0000 https://quickchangetool.com/2026/07/vtg-armstrong-quick-change-tool-holder-post-81-023-made-usa-lathe-cnc-machinist-2/











The VTG Armstrong Quick Change Tool Holder Post 81-023 is a high-quality tool post designed for CNC machinists and lathes. Made in the United States by Armstrong, this quick change tool post allows for easy and efficient tool changes, increasing productivity and accuracy in machining processes. With a durable construction and reliable performance, this tool holder post is a valuable asset for professionals in the metalworking industry. This holder might be dirty from years of use but is in the same condition as it was day one.

]]> https://quickchangetool.com/2026/07/vtg-armstrong-quick-change-tool-holder-post-81-023-made-usa-lathe-cnc-machinist-2/feed/ 0 https://quickchangetool.com/2026/07/14-20-swing-lathe-quick-change-tool-post-ca-250-444-wedge-design/ https://quickchangetool.com/2026/07/14-20-swing-lathe-quick-change-tool-post-ca-250-444-wedge-design/#comments Thu, 16 Jul 2026 18:48:49 +0000 https://quickchangetool.com/2026/07/14-20-swing-lathe-quick-change-tool-post-ca-250-444-wedge-design/
























CA 250-444 Wedge Quick Change Tool Post Set for 14-20 Inch Swing Lathe. QUICK CHANGE TOOL POST CATEGORY: Quick Change Tool Posts. QUICK CHANGE TOOL POST SERIES: CA. QUICK CHANGE TOOL POST TYPE: Wedge. For use on lathes with 14″ – 20″ swing (defined as the diameter that can be turned over the bed) Precision-engineered to assure repetitive accuracy Quickly and easily installed on an engine, bench, or turret lathe for a wide range of operations All working parts precision ground and hardened Completely sealed for maintenance free operation! Rigid wedge design, easily centered! 14-20 Swing Lathe Quick Change Tool Post CA 250-444 Wedge Design. CA Wedge Tool Post 14-20 Swing Quick Change Lathe Tool Holder 250-444. Quick Change Tool Posts. QUICK CHANGE TOOL POST CATEGORY. QUICK CHANGE TOOL POST SERIES. QUICK CHANGE TOOL POST TYPE. If there is any fault or problem with the product, please don’t be shy to express it, we will solve it at the first time. Electric Motor & Pump. Quick Change Tool Post. Metal Cut Off Wheels. New Products Discount Zone. Double shoulder Strap For Echo Universal Trimmer Harness Brush Cutter Orange. 48 Pack Oscillating Multi Tool Saw Blades 24 Pcs 1-3/8 Inch & 24 Pcs 1-3/4 Inch. 5 MATCHED PAIRS ULTRA PRECISION 1-2-3 BLOCKS. 0001 MACHINIST 123 23 HOLES. 5Inch Bench Vise with Anvil Swivel Locking Base Table Top Clamp Heavy Duty Vice. E6013 1/8″ x 14″ Premium Arc Welding Rods Carbon Steel Electrode 10 lbs with Box. 250-201 250-201XL 250-202 250-202XL For BXA Tool Post Tool Holder 4 PC. 3 Way 2 Position Direction Control Solenoid Valve 1/4 110V AC NPT. 11 Ton Heavy Duty Swivel Lifting Hook 1-1/8 Inch with Safety Latch Grade 80. 30000 RPM ISO30 ER16 Tool Holder 70mm G2.5 Balanced. KN83101673 274224 ES10774 83101673 4 Pack Drive Belt For New Holland 442 452.

]]> https://quickchangetool.com/2026/07/14-20-swing-lathe-quick-change-tool-post-ca-250-444-wedge-design/feed/ 0 https://quickchangetool.com/2026/07/8-pcs-wedge-type-axa-quick-change-tool-post-with-tool-holders-for-lathe-swing-di/ https://quickchangetool.com/2026/07/8-pcs-wedge-type-axa-quick-change-tool-post-with-tool-holders-for-lathe-swing-di/#comments Wed, 15 Jul 2026 06:45:48 +0000 https://quickchangetool.com/2026/07/8-pcs-wedge-type-axa-quick-change-tool-post-with-tool-holders-for-lathe-swing-di/









100% Satisfaction Satisfaction Guaranteed. 8 PCS Wedge Type AXA Quick Change Tool Post with Tool Holders for Lathe Swing Dia 6-12,250-111 (AXA-8PCS). Weight: 15.0 lb. Packing list (total 8 pc) (1), 1 x 250-111 Wedge Type Tool Post; (2), 1 x 250-101 Turning and Facing Tool Holder, use tool bit up to 1/2″ ; (3), 1 x 250-102 Boring, Turning and Facing Tool Holder, use tool bit up to 1/2″; (4), 1 x 250-101XL, Turning and Facing Tool Holder, use tool bit up to 5/8″ ; (5), 1 x 250-102XL, Boring, Turning and Facing Tool Holder, use tool bit up to 5/8″; (6), 1 x 250-104 Heavy Duty Boring Bar Holder, can use both 5/8″ and 3/4″ shank boring bars ; (7), 1 x 250-107 Parting Blade Tool Holder, use 1/2 high parting blades; (8), 1 x 250-110 Knurling and Turning Tool Holder. Special Attention: The tool post comes with a oversize blank T-nut, All user need to machine it according to his own specific lathe, thank you for the work you have done it. For QCTP, we have over 25 years of manufacturing experience, please trust your choice, thank you. Wedge Type AXA Fitting Lathe Center Line Heights 0.6 – 1.75″ (The Top Cross Slide Tool Post Mounting Surface to The Lathe Center Line); Such As: South Bend 9″&10″, Atlas6″, 10″&12″, Delta10″&11″, Nardini TT1000&TT1200 and Many Other Similar Size Lathe; AXA series QCTP suitable for Lathe swing: 6-12 inches. Each tool holder of whole set QCTP perfect Interchangeable with ALORIS, all surfaces are precision grinding and has high accurate repeatability; The position of each tool holder locked onto the tool post main body, is approximately at the 5 o’clock direction. AXA tool post set are suitable for Lathe swing:6-12 inches;The tool post comes with a oversize blank T-nut, user need to machine it according to his own specific lathe, thank you for the work you have done. Whole set of this wedge type AXA includes:250-111, 250-101, 250-102, 250-101XL, 250-102XL, 250-104, 250-107, 250-110, total 8pc. Most of the fasteners of this wedge type AXA set are made of stainless steel screws, which are more beautiful, more sturdy. We guarantee against any defective or misrepresented products.

]]> https://quickchangetool.com/2026/07/8-pcs-wedge-type-axa-quick-change-tool-post-with-tool-holders-for-lathe-swing-di/feed/ 0 https://quickchangetool.com/2026/07/older-aloris-ca-metal-lathe-quick-change-tool-post-turret-machinist-tooling-2/ https://quickchangetool.com/2026/07/older-aloris-ca-metal-lathe-quick-change-tool-post-turret-machinist-tooling-2/#comments Tue, 14 Jul 2026 06:43:59 +0000 https://quickchangetool.com/2026/07/older-aloris-ca-metal-lathe-quick-change-tool-post-turret-machinist-tooling-2/

















USED, WORKING, ALORIS CA TOOL POST. THE ID PLATE IS MISSING. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

]]> https://quickchangetool.com/2026/07/older-aloris-ca-metal-lathe-quick-change-tool-post-turret-machinist-tooling-2/feed/ 0 https://quickchangetool.com/2026/07/10pcs-cxa-1-250-301-quick-change-tool-post-turning-facing-holder-for-lathe-4/ https://quickchangetool.com/2026/07/10pcs-cxa-1-250-301-quick-change-tool-post-turning-facing-holder-for-lathe-4/#comments Mon, 13 Jul 2026 06:40:47 +0000 https://quickchangetool.com/2026/07/10pcs-cxa-1-250-301-quick-change-tool-post-turning-facing-holder-for-lathe-4/









Material: Steel Tool Post Type: Quick Change Tool Post. Securely holds 1/2″ – 3/4″ square tool bits For use with CXA tool posts 250-300 or 250-333. Interchangeable with Dorian, Aloris, & Phase II CXA series tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts. This product has undergone rigorous quality testing Durable and easy to install and replace The most cost-effective and best after-sales service Quality assurance that gives you peace of mind. 10Pcs CXA #1 250-301 Quick Change Tool Post Turning & Facing Holder For Lathe. Precision ground and hardened. Completely sealed for maintenance free operation Turning and facing tools can be locked together (saving time and labor when changing operations). 10Pcs CXA 250-301 Quick Change Tool Post Holder. We have warehouses in California and New Jersey. Thank you for your understanding. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. Set_id=880000500F’ center center / 100% auto no-repeat; #product1_5bb1587a403f67d3daa5b3cdd3dcff67. Image{width: 100%;} #product1_5bb1587a403f67d3daa5b3cdd3dcff67. Title{margin: auto; width: 85%; font-size:11px; font-family: Arial; line-height: 12px; text-decoration: none; display: block; height: 2em; overflow: hidden; text-align: center; color : #191919; padding-top: 4px;} #product1_5bb1587a403f67d3daa5b3cdd3dcff67. Title:before content:’300Pack Zip Ties Heavy Duty Assorted Sizes 12\\.

]]> https://quickchangetool.com/2026/07/10pcs-cxa-1-250-301-quick-change-tool-post-turning-facing-holder-for-lathe-4/feed/ 0 https://quickchangetool.com/2026/07/14-20-swing-lathe-ca-250-444-wedge-type-quick-change-tool-holder/ https://quickchangetool.com/2026/07/14-20-swing-lathe-ca-250-444-wedge-type-quick-change-tool-holder/#comments Sun, 12 Jul 2026 18:39:06 +0000 https://quickchangetool.com/2026/07/14-20-swing-lathe-ca-250-444-wedge-type-quick-change-tool-holder/

























CA 250-444 Wedge Quick Change Tool Post Set for 14-20 Inch Swing Lathe. QUICK CHANGE TOOL POST CATEGORY: Quick Change Tool Posts. QUICK CHANGE TOOL POST SERIES: CA. QUICK CHANGE TOOL POST TYPE: Wedge. For use on lathes with 14″ – 20″ swing (defined as the diameter that can be turned over the bed) Precision-engineered to assure repetitive accuracy Quickly and easily installed on an engine, bench, or turret lathe for a wide range of operations All working parts precision ground and hardened Completely sealed for maintenance free operation! Rigid wedge design, easily centered! 14-20 Swing Lathe CA 250 444 Wedge Type Quick Change Tool Holder. CA Wedge Tool Post 14-20 Swing Quick Change Lathe Tool Holder 250-444. Quick Change Tool Posts. QUICK CHANGE TOOL POST CATEGORY. QUICK CHANGE TOOL POST SERIES. QUICK CHANGE TOOL POST TYPE. We hope you have a pleasant shopping experience with us and satisfy 100%. Please give us the opportunity to resolve any problem. Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. Set_id=880000500F’ center center / 100% auto no-repeat; #product1_693f9616e6218e21ca3aaa7c69a62d2b. Image{width: 100%;} #product1_693f9616e6218e21ca3aaa7c69a62d2b. Title{margin: auto; width: 85%; font-size:11px; font-family: Arial; line-height: 12px; text-decoration: none; display: block; height: 2em; overflow: hidden; text-align: center; color : #191919; padding-top: 4px;} #product1_693f9616e6218e21ca3aaa7c69a62d2b. Title:before content:’X-Tube Heat Shrink Wrap Tubing For Rod Grips-5 Color 14 Sizes 39\\.

]]> https://quickchangetool.com/2026/07/14-20-swing-lathe-ca-250-444-wedge-type-quick-change-tool-holder/feed/ 0