https://quickchangetool.com Sat, 25 Jul 2026 19:13:31 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://quickchangetool.com/2026/07/4-enco-1-phase-ii-da-size-quick-change-tool-holder-4-turning-1-morse-taper/ https://quickchangetool.com/2026/07/4-enco-1-phase-ii-da-size-quick-change-tool-holder-4-turning-1-morse-taper/#comments Sat, 18 Jul 2026 18:52:43 +0000 https://quickchangetool.com/2026/07/4-enco-1-phase-ii-da-size-quick-change-tool-holder-4-turning-1-morse-taper/








Stantec Sales & Services is Offering the Following Equipment. 4 Enco & 1 PHASE II DA Size Quick Change Tool Holder 4 TURNING & 1 MORSE TAPER. 1 – ENCO 1750 B TURNING. 1 – ENCO 1750 CM MORSE TAPER. 1 – PHASE II 250-502 TURNING. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at any time.

]]> https://quickchangetool.com/2026/07/4-enco-1-phase-ii-da-size-quick-change-tool-holder-4-turning-1-morse-taper/feed/ 0 https://quickchangetool.com/2026/04/beaver-tool-usa-1-12-shank-quick-change-tool-holder-lot-morse-face-mill-collet/ https://quickchangetool.com/2026/04/beaver-tool-usa-1-12-shank-quick-change-tool-holder-lot-morse-face-mill-collet/#comments Sat, 25 Apr 2026 13:49:42 +0000 https://quickchangetool.com/2026/04/beaver-tool-usa-1-12-shank-quick-change-tool-holder-lot-morse-face-mill-collet/












7 pc LOT of good used 1-1/2 straight shank Tool Holders. Beaver Tool & Eng. 1-1/2 OD Shank with keyway. End Mill Holders (2) 3/8″, 7/8″, and 1/4 (hole is bad). 2 Morse Taper Drill holder. 3/4 Face Mill Arbor – 1 drive pin broken. ZZ Collet Chuck with 1″, 3/4″ (worn), 1/2″ and 3/8″ ZZ Collets.

]]> https://quickchangetool.com/2026/04/beaver-tool-usa-1-12-shank-quick-change-tool-holder-lot-morse-face-mill-collet/feed/ 0 https://quickchangetool.com/2026/03/weldon-tool-co-quick-change-end-mill-holders-shell-mill-holders-morse-taper-lot/ https://quickchangetool.com/2026/03/weldon-tool-co-quick-change-end-mill-holders-shell-mill-holders-morse-taper-lot/#comments Sun, 22 Mar 2026 12:32:52 +0000 https://quickchangetool.com/2026/03/weldon-tool-co-quick-change-end-mill-holders-shell-mill-holders-morse-taper-lot/





Weldon Tool Co Quick Change End Mill Holders, Shell Mill Holders, Morse Taper Adapter.

]]> https://quickchangetool.com/2026/03/weldon-tool-co-quick-change-end-mill-holders-shell-mill-holders-morse-taper-lot/feed/ 0 https://quickchangetool.com/2026/02/axa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper-2/ https://quickchangetool.com/2026/02/axa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper-2/#comments Tue, 24 Feb 2026 12:37:40 +0000 https://quickchangetool.com/2026/02/axa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper-2/





HoldFast, AXA lathe tool racks can hold 3 Morse Taper tailstock tools, and 8-12 quick change tools depending on tool size and brand. Tool racks are fabricated out of 12-gauge (0.1046) steel with an industrial powder coat finish. Quick-change tool holders, and tapered tailstock tool sockets are produced from high quality 3D prints which provide excellent strength, and impact resistance while protecting the precision surfaces of your lathe tools when being stored. HoldFast Quick Change Toolholders are designed to be interchangeable across brands including “Aloris, Dorian, Phase2, ” and most other import brands. Toolholders are produced from high quality 3D prints with excellent strength, and impact resistance. Each toolholder comes with fasteners compatible with holdfast LR-Series tool racks. See the chart in “product images” to find which toolholder is compatible with you QCTP tool holders. AXA-10 Tool Rack (Length = 34). AXA 10 Tool Rack. AXA-Single Toolholders with fasteners. AXA-Double Toolholders with fasteners. Morse Taper “Twist & Lock” Sockets.

]]> https://quickchangetool.com/2026/02/axa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper-2/feed/ 0 https://quickchangetool.com/2025/10/mab485-magnetic-drill-with-internal-coolant-system-quick-change-connector-morse/ https://quickchangetool.com/2025/10/mab485-magnetic-drill-with-internal-coolant-system-quick-change-connector-morse/#comments Mon, 20 Oct 2025 06:59:34 +0000 https://quickchangetool.com/2025/10/mab485-magnetic-drill-with-internal-coolant-system-quick-change-connector-morse/ ]]> https://quickchangetool.com/2025/10/mab485-magnetic-drill-with-internal-coolant-system-quick-change-connector-morse/feed/ 0 https://quickchangetool.com/2025/07/aloris-ca-quick-change-tool-post-with-ca-54-morse-taper-holder/ https://quickchangetool.com/2025/07/aloris-ca-quick-change-tool-post-with-ca-54-morse-taper-holder/#comments Thu, 24 Jul 2025 04:00:41 +0000 https://quickchangetool.com/2025/07/aloris-ca-quick-change-tool-post-with-ca-54-morse-taper-holder/








The Aloris CA Quick Change Tool Post comes with a CA 54 Morse Taper Holder. It is designed for efficient tool changes in metalworking machinery. The quick-change feature allows for rapid switching between different tools, increasing productivity and convenience during machining operations. We can help you with parts or whole machines and we can also help with your surplus inventory or if you are getting rid of surplus equipment. Thanks for your interest.

]]> https://quickchangetool.com/2025/07/aloris-ca-quick-change-tool-post-with-ca-54-morse-taper-holder/feed/ 0 https://quickchangetool.com/2025/07/aloris-ca54-ca-54-4mt-4-morse-taper-lathe-quick-change-tool-holder/ https://quickchangetool.com/2025/07/aloris-ca54-ca-54-4mt-4-morse-taper-lathe-quick-change-tool-holder/#comments Fri, 04 Jul 2025 03:19:49 +0000 https://quickchangetool.com/2025/07/aloris-ca54-ca-54-4mt-4-morse-taper-lathe-quick-change-tool-holder/





Google model part number for full specs.

]]> https://quickchangetool.com/2025/07/aloris-ca54-ca-54-4mt-4-morse-taper-lathe-quick-change-tool-holder/feed/ 0 https://quickchangetool.com/2025/02/cxa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/ https://quickchangetool.com/2025/02/cxa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/#comments Wed, 05 Feb 2025 20:57:54 +0000 https://quickchangetool.com/2025/02/cxa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/









HoldFast, CXA lathe tool racks can hold 3 Morse Taper tailstock tools, and 8-12 quick change tools depending on tool size and brand. Tool racks are fabricated out of 12-gauge (0.1046) steel with an industrial powder coat finish. Quick-change tool holders, and tapered tailstock tool sockets are produced from high quality 3D prints which provide excellent strength, and impact resistance while protecting the precision surfaces of your lathe tools when being stored. HoldFast Quick Change Toolholders are designed to be interchangeable across brands including “Aloris, Dorian, Phase2, ” and most other import brands. Toolholders are produced from high quality 3D prints with excellent strength, and impact resistance. Each toolholder comes with fasteners compatible with holdfast LR-Series tool racks. See the chart below to find which toolholder is compatible with you QCTP tool holders. CXA-12 Tool Rack (Length = 40). CXA-10 Tool Rack (Length = 34). CXA – 12 Tool Rack. CXA/Single toolholders with fasteners. CXA/Double toolholders with fasteners. Morse Taper “twist & lock” Sockets. CXA – 10 Tool Rack.

]]> https://quickchangetool.com/2025/02/cxa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/feed/ 0 https://quickchangetool.com/2024/03/bxa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/ https://quickchangetool.com/2024/03/bxa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/#comments Wed, 27 Mar 2024 01:34:16 +0000 https://quickchangetool.com/2024/03/bxa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/












The BXA, LR-Series lathe tool racks are fabricated out of 12-gauge steel. 120 with an industrial powder coat finish. The LR-Series racks can store 6 to 10 quick change tools depending on tool size and can store up to 3 Morse Taper tailstock tools. The BXA quick change toolholders are compatible with “Aloris, Dorian, Phase II, and most import brands using the BXA size standard”. The morse taper tailstock holders come with rubber grommet inserts to prevent tool tapers from scratching or marring when racking and un-racking. See Below for “Lathe Tool Rack Dimensions, Tool Compatibility, & Included Contents” of each size variation. Overall Dimensions: (L-27.5″ x W-4.5″ x H-4). Tool Compatibility: (BXA) (MT3). Included: (1x Tool Rack) (6x BXA Toolholders with fasteners). Overall Dimensions: (L-33.25″ x W-4.5″ x H-4). Included: (1x Tool Rack) (8x BXA Toolholders with fasteners). Overall Dimensions: (L-39.25″ x W-4.5″ x H-4). Included: (1x Tool Rack) (10x BXA Toolholders with fasteners). Overall Dimensions: (L-28″ x W-4.5″ x H-5). Tool Compatibility: (BXA) (MT4). Overall Dimensions: (L-34″ x W-4.5 x H-5″). Overall Dimensions: (L-40″ x W-4.5″ x H-5).

]]> https://quickchangetool.com/2024/03/bxa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/feed/ 0 https://quickchangetool.com/2023/09/axa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/ https://quickchangetool.com/2023/09/axa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/#comments Sat, 09 Sep 2023 03:34:51 +0000 https://quickchangetool.com/2023/09/axa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/










The AXA, LR-Series lathe tool racks are fabricated out of 12-gauge steel. 120 with an industrial powder coat finish. The LR-Series racks can store 6 to 8 quick change tools depending on tool size and can store up to 3 Morse Taper tailstock tools. The AXA quick change toolholders are compatible with “Aloris, Dorian, Phase II, and most import brands using the AXA size standard”. The morse taper tailstock holders come with rubber grommet inserts to prevent tool tapers from scratching or marring when racking and un-racking. See Below for “Lathe Tool Rack Dimensions, Tool Compatibility, & Included Contents” of each size variation. Overall Dimensions: (L-27.25″ x W-4.5″ x H-3.5). Tool Compatibility: (AXA) (MT2). Included: (1x Tool Rack) (6x AXA-Toolholders with Fasteners). (L-33.25″ x W-4.5″ x H-3.5). (1x Tool Rack) (8x AXA-Toolholders with Fasteners). Overall Dimension: (L-27.25″ x W-4.5″ x H4). Tool Compatibility: (AXA) (MT3). Overall Dimension: (L-33.25″ x W-4.5″ x H-4). Included: (1x Tool Rack) (8x AXA-Toolholders with Fasteners).

]]> https://quickchangetool.com/2023/09/axa-tool-rack-metal-lathe-quick-change-tool-holder-qctp-morse-taper/feed/ 0