https://quickchangetool.com Sun, 07 Jun 2026 16:58:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://quickchangetool.com/2026/06/swiss-made-40-position-db32140-quick-change-tool-holder-enco-e-3g-multifix/ https://quickchangetool.com/2026/06/swiss-made-40-position-db32140-quick-change-tool-holder-enco-e-3g-multifix/#comments Fri, 05 Jun 2026 16:45:00 +0000 https://quickchangetool.com/2026/06/swiss-made-40-position-db32140-quick-change-tool-holder-enco-e-3g-multifix/





What you see, is what you get.

]]> https://quickchangetool.com/2026/06/swiss-made-40-position-db32140-quick-change-tool-holder-enco-e-3g-multifix/feed/ 0 https://quickchangetool.com/2026/06/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120-bb32130/ https://quickchangetool.com/2026/06/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120-bb32130/#comments Tue, 02 Jun 2026 04:37:44 +0000 https://quickchangetool.com/2026/06/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120-bb32130/







You may also like. 40 Position Quick Change Tool Post Kit Multifix Size B2/B with BD25120 BB32130. Ed on lathes which turning diameter is from 300mm to 500mm. C06236, MATE360, C6240, Yangzhou Super C6241, C6246, etc. Our B2 and holders are made to fit with ORIGINAL MULTIFIX TYPE B made in Switherland. To select a right tool post for your lathe, swing over bed is not the only data to refer. Also need to know your lathe tool top slide width and lathe main motor power. For a light duty bench lathe with 360mm(14) swing and main power less than 3KW, a smaller model E5 might be OK for work. For a middle or heavy. Duty lathe with same 360mm(14) swing and main power more than 3KW, model B2 should be better. This B2 set is a standanrd kit. It includes the following. 1x B2 multifix tool post &locking wrench. 3x BD25120 turning tool holder. BD25120 can hold 25mm shank(1 tip height) turning tool. 1X BB32130 boring turning tool holder, This boring tool holder is with small V notch. It can be used as turning tool holder too. 1X T wrench for tool holders. Net weight: 11.6KGS, Gross weight: 12.3KGS. Because of the different time zone, please give us some time, all the emails will be answered within 24 hours. Thanks for your understand and support! We will provide you with the most satisfactory solution. We can provide you with value discounts and more efficient and faster transportation. In the event that you receive the item is not in the standards above. Good communication helps buyers and sellers to solve any problems. We will be glad to work together and provide a satisfying solution. PaymentShippingReturn policyAbout usContact us.

]]> https://quickchangetool.com/2026/06/40-position-quick-change-tool-post-kit-multifix-size-b2b-with-bd25120-bb32130/feed/ 0 https://quickchangetool.com/2026/05/40-position-quick-change-tool-post-multifix-size-a1-with-a1d2090-a1b2090-holders/ https://quickchangetool.com/2026/05/40-position-quick-change-tool-post-multifix-size-a1-with-a1d2090-a1b2090-holders/#comments Mon, 18 May 2026 15:47:52 +0000 https://quickchangetool.com/2026/05/40-position-quick-change-tool-post-multifix-size-a1-with-a1d2090-a1b2090-holders/

















A1 QUICK CHANGE TOOL POST – MULTIFIX 40 POSITION. A1 For Lathe Swing – 150mm To 300mm (6″ – 12″) Mounting Bore – 20mm (10.2mm) Block Height – 54mm. Turning & Facing Holder – 20mm Holding Capacity Boring Holder – 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 3 x Turning & Facing Holders (A1D2090) – 20mm Holding Capacity 1 x Boring Holder (AIB2090). 20mm Holding Capacity. 1 x T Wrench. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6″-12″). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws. Tools can be reground without removal form tool holder, so the setting remains unaltered. 40 possible instrument angles can be. Conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post: HRC 50±2 degree after heat-treatment. Tool holder: HRC 42±2 degree after heat-treatment. Knurled metal thumb screw for accurate and secure tool holding. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system. The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characterised by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. SET INCLUDES – 1 MAIN BLOCK + 3 TURNING & FACING HOLDERS + 1 BORING HOLDER. Family-run business engaged in the manufacturing & supplying of Engineering Tools & Industrial Supplies for the last 40 years. Comprising of a dedicated & skilled team of engineers with an aim of supplying our clients with products of the highest industrial standards at the most affordable pricing.

]]> https://quickchangetool.com/2026/05/40-position-quick-change-tool-post-multifix-size-a1-with-a1d2090-a1b2090-holders/feed/ 0 https://quickchangetool.com/2026/05/a1-40position-quick-change-tool-post-11-pc-for-150-300mm-lathe-6-12-multifix-a-2/ https://quickchangetool.com/2026/05/a1-40position-quick-change-tool-post-11-pc-for-150-300mm-lathe-6-12-multifix-a-2/#comments Mon, 04 May 2026 02:51:42 +0000 https://quickchangetool.com/2026/05/a1-40position-quick-change-tool-post-11-pc-for-150-300mm-lathe-6-12-multifix-a-2/

















A / A1 QUICK CHANGE TOOL POST – MULTIFIX 40 POSITION. A / A1 For Lathe Swing – 150mm To 300mm Mounting Bore – 20mm (10.2mm) Block Height – 54mm. Standard Holder / Turning & Facing Holder – 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 10 x Standard Holders /. Turning & Facing Holder. (A1D2090) – 20mm Holding Capacity. 1 x T Wrench. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6″-12″). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws. Tools can be reground without removal form tool holder, so the setting remains unaltered. 40 possible instrument angles can be. Conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post: HRC 50±2 degree after heat-treatment. Tool holder: HRC 42±2 degree after heat-treatment. Knurled metal thumb screw for accurate and secure tool holding. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system. The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characterised by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. SET INCLUDES – 1 MAIN BLOCK +10 STANDARD HOLDERS. Family-run business engaged in the manufacturing & supplying of Engineering Tools & Industrial Supplies for the last 40 years. Comprising of a dedicated & skilled team of engineers with an aim of supplying our clients with products of the highest industrial standards at the most affordable pricing.

]]> https://quickchangetool.com/2026/05/a1-40position-quick-change-tool-post-11-pc-for-150-300mm-lathe-6-12-multifix-a-2/feed/ 0 https://quickchangetool.com/2026/04/size-aa-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-12/ https://quickchangetool.com/2026/04/size-aa-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-12/#comments Thu, 09 Apr 2026 13:10:50 +0000 https://quickchangetool.com/2026/04/size-aa-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-12/







Size Aa Quick Change Tool Post Holder for Mini Lathe Multifix Lathe Tool Post. Tool post & holder with precision pofile- -ground gearing. Plenty of working positins for more tol holders. Adjust height of cutig edge easily and acratly. Change tools in seconds. It feaures extemal tooningool-machining. Accuratle repeatability is 0.01mm. Fully interchangeable with other German and Swiss types. For manual and CNC- lathe. Repeatability [mm]: 0.01. Recommended top slide width [mm]: 45 – 50. Adjustable turning tool height [mm]: 4 – 12. Turning diameter [mm]: 120 – 220. 1 x basic body. 3 x steel holders AaD 1250. 1 x steel holder AaH 1250. 1 x square key. Is the only accepted paying method in our store. But, we’d like to assist you to receive the goods smoothly if there are anything we can do here. USA, Canada, UnitedKingdom, Austrilia, France, Germany. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. We will solver the problem for you with a satisfactory solution. We care about all of our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. Pleasant shopping with us. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Welcome to our store! In the sale of high-quality. If you are astisfied with the item as well as our service, please kindly leave us a. To help develop our business. We would highly appreciate your kindly & encouraging approval. If any questions or concern with your order, please us before you leaving Negative/Neutral feedback or opening disputes. We will offer help to resolve your problems as fast as possible.

]]> https://quickchangetool.com/2026/04/size-aa-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-12/feed/ 0 https://quickchangetool.com/2026/03/40-position-quick-change-tool-post-a1-multifix-size-with-ad2090-ab2090-holder-us/ https://quickchangetool.com/2026/03/40-position-quick-change-tool-post-a1-multifix-size-with-ad2090-ab2090-holder-us/#comments Tue, 31 Mar 2026 00:50:47 +0000 https://quickchangetool.com/2026/03/40-position-quick-change-tool-post-a1-multifix-size-with-ad2090-ab2090-holder-us/





















A1 QUICK CHANGE TOOL POST – MULTIFIX 40 POSITION. A1 For Lathe Swing – 150mm To 300mm Mounting Bore – 20mm (10.2mm) Block Height – 54mm. Standard Holder – 20mm Holding Capacity Boring Holder – 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 3 x Standard Holders (A1D2090) – 20mm Holding Capacity 1 x Boring Holder (AIB2090). 20mm Holding Capacity. 1 x T Wrench. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6″-12″). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special set screws. Tools can be reground without removal form tool holder, so the setting remains unaltered. 40 possible instrument angles can be. Conveniently selected from position dials with marker. Holders are interchangeable with most other brands of 40 position tool post. Tool Post: HRC 50±2 degree after heat-treatment. Tool holder: HRC 42±2 degree after heat-treatment. Knurled metal thumb screw for accurate and secure tool holding. Basic body and tool holder are made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system. The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characterised by their unlimited diversity in the use of lathe tools, drills, reamers and boring bars. SET INCLUDES – 1 MAIN BLOCK +3 STANDARD HOLDERS + 1 BORING HOLDER. Family-run business engaged in the manufacturing & supplying of Engineering Tools & Industrial Supplies for the last 40 years. Comprising of a dedicated & skilled team of engineers with an aim of supplying our clients with products of the highest industrial standards at the most affordable pricing.

]]> https://quickchangetool.com/2026/03/40-position-quick-change-tool-post-a1-multifix-size-with-ad2090-ab2090-holder-us/feed/ 0 https://quickchangetool.com/2026/03/aa-size-quick-change-tool-post-holder-for-lathe-mini-multifix-lathe-tool-post/ https://quickchangetool.com/2026/03/aa-size-quick-change-tool-post-holder-for-lathe-mini-multifix-lathe-tool-post/#comments Sat, 28 Mar 2026 12:45:41 +0000 https://quickchangetool.com/2026/03/aa-size-quick-change-tool-post-holder-for-lathe-mini-multifix-lathe-tool-post/










Size Aa Quick Change Tool Post Holder for Mini Lathe Multifix Lathe Tool Post. Tool post & holder with precision pofile- -ground gearing. Plenty of working positins for more tol holders. Adjust height of cutig edge easily and acratly. Change tools in seconds. It feaures extemal tooningool-machining. Accuratle repeatability is 0.01mm. Fully interchangeable with other brand German and Swiss types. For manual and CNC- lathe. Repeatability [mm]: 0.01. Recommended top slide width [mm]: 45 – 50. Adjustable turning tool height [mm]: 4 – 12. Turning diameter [mm]: 120 – 220. 1 x basic body. 3 x steel holders AaD 1250. 1 x steel holder AaH 1250. 1 x square key. Otherwise we can’t guarantee the package would arrive smoothly. Return accepted in 30 days after you receive the item. Return package must be in the original packaging, item must be in new condition.

]]> https://quickchangetool.com/2026/03/aa-size-quick-change-tool-post-holder-for-lathe-mini-multifix-lathe-tool-post/feed/ 0 https://quickchangetool.com/2026/03/size-aa-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-11/ https://quickchangetool.com/2026/03/size-aa-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-11/#comments Thu, 19 Mar 2026 12:26:48 +0000 https://quickchangetool.com/2026/03/size-aa-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-11/













Size Aa Quick Change Tool Post Holder for Mini Lathe Multifix Lathe Tool Post. Features: -Tool post & holder with precision pofile- -ground gearing. Plenty of working positins for more tol holders. Adjust height of cutig edge easily and acratly. Change tools in seconds. Accuratle repeatability is 0.01mm. Fully interchangeable with other brand German and Swiss types. For manual and CNC- lathe. Technical specifications: Repeatability [mm]: 0.01 Recommended top slide width [mm]: 45 – 50 Adjustable turning tool height [mm]: 4 – 12 Turning diameter [mm]: 120 – 220. Package include: 1 x basic body 3 x steel holders AaD 1250 1 x steel holder AaH 1250 1 x wrench 1 x square key.

]]> https://quickchangetool.com/2026/03/size-aa-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-11/feed/ 0 https://quickchangetool.com/2026/02/aa-size-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-3/ https://quickchangetool.com/2026/02/aa-size-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-3/#comments Mon, 09 Feb 2026 12:06:47 +0000 https://quickchangetool.com/2026/02/aa-size-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-3/










Size Aa Quick Change Tool Post Holder for Mini Lathe Multifix Lathe Tool Post. Tool post & holder with precision pofile- -ground gearing. Plenty of working positins for more tol holders. Adjust height of cutig edge easily and acratly. Change tools in seconds. It feaures extemal tooningool-machining. Accuratle repeatability is 0.01mm. Fully interchangeable with other brand German and Swiss types. For manual and CNC- lathe. Repeatability [mm]: 0.01. Recommended top slide width [mm]: 45 – 50. Adjustable turning tool height [mm]: 4 – 12. Turning diameter [mm]: 120 – 220. 1 x basic body. 3 x steel holders AaD 1250. 1 x steel holder AaH 1250. 1 x square key. Otherwise we can’t guarantee the package would arrive smoothly. Return accepted in 30 days after you receive the item. Return package must be in the original packaging, item must be in new condition.

]]> https://quickchangetool.com/2026/02/aa-size-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-3/feed/ 0 https://quickchangetool.com/2026/02/aa-size-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-2/ https://quickchangetool.com/2026/02/aa-size-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-2/#comments Mon, 09 Feb 2026 00:05:41 +0000 https://quickchangetool.com/2026/02/aa-size-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-2/







Tool post & holder with precision pofile- -ground gearing. Plenty of working positins for more tol holders. Adjust height of cutig edge easily and acratly. Change tools in seconds. It feaures extemal tooningool-machining. Accuratle repeatability is 0.01mm. Fully interchangeable with other brand German and Swiss types. For manual and CNC- lathe. Repeatability [mm]: 0.01. Recommended top slide width [mm]: 45 – 50. Adjustable turning tool height [mm]: 4 – 12. Turning diameter [mm]: 120 – 220. 1 x basic body. 3 x steel holders AaD 1250. 1 x steel holder AaH 1250. 1 x square key.

]]> https://quickchangetool.com/2026/02/aa-size-quick-change-tool-post-holder-for-mini-lathe-multifix-lathe-tool-post-2/feed/ 0