T37 quick change tool post set. Bonus Quality quick-change tool post for lathes. All parts are hardened and precisely ground. Main block size is 58 x 58 x 37 mm high with a (11.5mm) bolt hole. 1 x 3/32×1/2×4 HSS cutting blade. Tool capacity up to 13 mm approx. This tool holder is suitable for […]
Quick change Tool Post for lathes. All parts hardened and precisely ground. Main Block Size is 58 x 58 x 37 mm high with a 7/16 (11.3mm) (Approx) Stud Bore. Set comes complete with 2 standard holders + 1 Boring Vee Holder and 1 Hex Spanner + 1 Allen key. 1 x Parting Holder. Packing […]
T51 Quick Change Tool Set. Quick change tool post for Boxford lathes, this set also fits Aud. Bud, and Cud model. All the parts are hardened and ground. The set comes with 2 standard holders, 1 Boring Holder, 1 parting holder. HSS blade of suitable size included in this set. The main block is 3″ […]
T-37 QUICK CHANGE TOOL POST FOR MIFORDS SUPER 7 / ML7 LATHES. Mounting Block Size (L X W X H). 2-1/4″ x 2-1/4″ x 1-3/8 (58 x 58 x 37mm). Blade Capacity of Parting Holder – 1/2. To Support Round Tools. /32″ x 1/2″ x 3. Comes Along With 1 Spanner And 1 Allen Key […]
Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6″-12″). One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning facing tool holders A1D2090. […]
T37 quick change tool holder. 1 Boring V Holder. The quick change tool holder is positioned to mount over the two rearmost T-slots of the longer cross slide as fitted to all Myford lathes. The Quick Change Tool Kit is designed to allow quick change of tools with precise repeatability. It mounts easily to the […]
T37 quick change tool holder. 1 Boring V Holder. The quick change tool holder is positioned to mount over the two rearmost T-slots of the longer cross slide as fitted to all Myford lathes. The Quick Change Tool Kit is designed to allow quick change of tools with precise repeatability. It mounts easily to the […]
4-piece set T37 quick-change tool holder ML7. This product data sheet was originally written in English. This is a high quality tool post set that is fully hardened and ground and made from alloy steel. Premium quality quick-change tool holder for lathes. All parts hardened and precisely ground. Main block size is 58 x 58 […]
This tool holder is suitable for 5/16 (8mm) or 3/8 (10mm) square turning tools as the center height cannot be achieved with larger tools. All parts are hardened and precisely ground. Main block size is 58 x 58 x 37mm high with a (11.5mm) (approx) bolt hole.
Situated at the industrial hub of India we specialize in providing complete tooling solutions. T63 Quick Change Tool Set In Wooden Box. This Quick Change set includes; 2 standard holders, 1 boring holder and 1 parting holder with blade(Blade size- 1/8 x 3/4 x 6).
Swiftray Theme Powered by WordPress