6 pc QUICK CHANGE WEDGE TOOL POST SET 250-110 SERIES 6 TO 12
6 pc QUICK CHANGE WEDGE TOOL POST SET 250-110 SERIES 6″ TO 12″. Condition: 100% Brand New & High Quality. Suitable for lathe center height 0.6 – 1.75″ (top compound surface to lathe center line), such as: South Bend 9″ & 10″, Atlas 10 & 12″, Delta 10 & 11 Nardini TT1000 & TT1200 and many other. No time wasted with shims. All working parts hardened and precision ground. Wedge type tool post are precision engineered to assure repeatability accuracy. Wedge type tool post Have the Maximum rigidity to get the chatter free performance. Lathe swing: 6″ -12″. Includes: 250-100 tool post holder, 250-102 holder, 250-104 holder, 250-107 holder, 250-110 holder. Hex Key Size: 1/8. Set Screw Thread Size: M8x19. Whole set includes one each of. 250-100 Wedge Type Tool Post. 250-102 Turning Tool Holder, use tool bit up to 1/2. 250-102 Boring, Turning Tool Holder, use tool bit up to 1/2″ and round shank tool bits up to 7/16″. 250-104 Heavy Duty Boring Bar Holder, use 5/8 and 3/4 shank boring bars. 250-107 Parting Blade Tool Holder, use 1/2 high parting blades. 250-110 Knurling and Turning Tool Holder. You can machined it to fit your specs. Wedge type tool posts are precision engineered to assure repetitive accuracy. Advanced design provides built in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on an engine, bench or turret lathe for a wide range of operations, from fine precise work to heavy duty cutting. Maximum rigidity for chatter free performance. Takes only a few seconds to change tools. The tool post comes with a blank T-Nut plate. The customer have to do some machining work to make it fit into their own specific lathe T slot. Package Include: 6 Quick Change Tool. Please make sure your address is correct before you pay. Thanks for your cooperation. We will offer proper arrangement and help to resolve any problem as soon as possible. All messages are answered within 1-2 work days. We will do our best to resolve the issue. GO KART MAINTENANCE TIPS. Go karts need to be maintained and repaired, just like a car. With regular maintenance, your kart will last a long time. Without proper care, it may end up in the trash heap, rotting away in the back yard, or become unsafe. Maintenance(Hope to bring some help to those who love karts). Oil: You should change the oil about ever 20 hours, or once a year. Most go kart engines should take 5w30 or 10w30’energy conserving’ oil. I use fully synthetic on mine. Air Filter: The air filter should be changed when its loaded up with dirt, or as often as your oil. Most filters come with a foam pre-filter, which can be cleaned out. Gas: Most industrial engines required regular unleaded fuel. Most fuel currently contains 10% ethanol. Adding a fuel stabilizer (available at any hardware or automotive store) will usually let you store your kart with old gas in it for a year with no problems. Clean: If your engine is covered in grease, you can spray on an engine degreaser, let it soak, then wash it down with a hose. If your engine is not running, chances are you have a dirty carb, and you should clean it out. The COMMON GO KART ENGINE ANAALYSIS OF ADVANTAGES. (Hope to bring some help to those who love karts). The only contender for the go kart engine that is cheap, but not built cheaply is the predator 212cc engine. No engine comes close to its usefulness, and its actually reliable. The best go kart engine for kids should sit right around 5-7 hp, have a 3/4? Shaft, and fit a centrifugal clutch or 30 series torque converter, and has a standard bolt pattern for easy mounting. Honda GX200 the king. The Honda GX series engines are built well, last long, but are a little expensive. There is a large market for this engine in racing, and with performance parts. The only way you can beat the honda gx series engine, is to make a copy of it in china, and sell it cheap, and that is what the box stock project clone engine is. Clone engines are arguably the best engine out there for go kart racers as they have their own class for racing. Briggs 5 hp Flathead is still out there. It was the king, but still commands a large presence. Many spare go kart engine parts, and performance parts are available for this classic engine. The newer OHV style engines outperform this engine. Briggs also has a niche market for go kart racing OHV engines, which are pretty pricey. A win-win for the consumer. Many go karts have been fixed up to have this reliable, cheap engine, which is why it is one of the best go kart engines used today. Honda GX340 GX390 11-13 hp I personally have the 11 and 13 (340 and 390) versions, and they are a blast to drive. Plan on going about 40 mph with plenty of torque on these guys. Predator 13 hp 420 cc: A few more cc’s and a lot less expensive than the briggs and honda counterparts, this engine is great. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post”. The seller is “dqvo2020″ and is located in this country: US. This item can be shipped to United States.
- Brand: Unbranded
- MPN: 250-100
- Tool Post Type: Quick Change Tool Post
- Custom Bundle: Yes
- Type: Quick Change Tool
- Model: Suitable for lathe center height 0.6 – 1.75\
- Lathe Swing: 6\
- Hex Key Size: 1/8\
- Set Screw Thread Size: M8x19
- Material: Steel