Blog Archives

ALORIS #DA-16N INDEXABLE TURNING & FACING QUICK CHANGE TOOL HOLDER 17 to 48

Made in the USA by Aloris Tool. This is a Quick-Change Indexable Combination Turning & Facing Lathe Tool Holder. Quickly and easily installed on the lathe, for a wide range of operations – from fine precision work to heavy duty cutting. Guaranteed lasting repetitive accuracy to within millionths. Only a second to change tools. Rugged […]

Read More

Aloris Bxa 1ix Indexable Turning & Facing Holder Oversize 3/4 Cap Quick Change

ALORIS BXA 1IX INDEXABLE TURNING & FACING HOLDER OVERSIZE 3/4 CAP QUICK CHANGE. Our part # ALO-BXA-1-IX. Indexable turning and facing holder #1-IX is oversized to allow up to 3/4 maximum tool capacity. Precision ground and hardened. Completely sealed for maintenance free operation. Dimensions: A=1-3/16″, B=3/4″, C=1-3/4″, Tool Capacity=3/4″. Turning and facing tools can be […]

Read More

Dorian D35CXA-41S Quick Change Boring Bar Holder withKennametal 1.5×12 Indexable

There is light wear to the tool holder and boring bar, but no damage. Dorian D35CXA-41S Quick Change Boring Bar Tool Holder. 1.5″ x 12″ Kennametal Indexable Boring Bar.

Read More

DORIAN QITP40N QUADRA LATHE QUICK CHANGE TOOL POST Aloris CA Indexable Monarch

Very nice Dorian toolpost- CA sized tool holders fit on it. Doesn’t look like it’s seen much use. Handle and screws turn smoothly.

Read More

Aloris Ca-i Indexable Starter Tool 5 Pc. Set 15-22 Swing Cnc Lathe Quick Change

ALORIS CA-I INDEXABLE STARTER TOOL 5 PC. SET 15-22 SWING CNC LATHE QUICK CHANGE. Our part # ALO-CA-I-SET. The Indexable Starter 5 Pc. Set includes: tool post, mounting wrench, “t” nut blank, (1) #1-I turning and facing holder, (2) #2-I turning, facing and boring holders, (1) #77-I cut-off holder. Blades, inserts and boring bars not […]

Read More

T37 Quick-Change Toolpost Miford & Indexable Carbide Insert lathe tool 8mm set

T37 Quick change toolpost set. Premium Quality Quick change Tool Post for lathes. All parts precisely Designed. Main Block Size is 58 x 58 x 37 mm high with a 11.5mm Stud Bore. 1 x 3/32×1/2×4 HSS Parting Blade. Tool capacity upto 13 mm approx. This toolpost is suitable for 5/16 (8mm) or 3/8 (10mm) […]

Read More

Aloris Bxa 77i Indexable Cut-off Holder Cnc Lathe Quick Change USA

ALORIS BXA 77I INDEXABLE CUT-OFF HOLDER CNC LATHE QUICK CHANGE USA. Our part # ALO-BXA-77-I. Indexable cut-off holder #77-I designed for extreme rigidity under heavy cutting conditions. For use with self locking blades. For bevel as well as T-cut blades. Holder allows you to cut-off close to chuck. Precision ground and hardened. Completely sealed for […]

Post Tagged with , , , , , ,
Read More

Aah1250 (1) Aad1250 (3) Holder for 40 Position Type Aa Multifix Indexable Quick

Aah1250 (1) Aad1250 (3) Holder for 40 Position Type Aa Multifix Indexable Quick. Three Square Turning Tool Holder AaD1250 for 40 Positing Type Aa Quick Change Tool Post. One piece Aa Quick Change Tool Post and its locking lever. One piece AaH1250 boring turning tool holder. T wrench for tool holder. I have one available. […]

Read More

Enco Model 30 Quick Change 3d2 Indexable Turret Tool Post With 4 Holders

ENCO MODEL 30 QUICK CHANGE INDEXABLE TURRET TOOL POST. HOLDER’S B C D E ALL GOOD CONDITION KNURLING TOOL HAS CHIP ON CORNER AND MISSING A WHEEL SEE PIC. C HOLDER FOR BORING BAR IS 3/4 ID. RAISED SLOT ON BOTTOM OF TOOL POST THAT MATES TO LATHE MEASURE’S 3/4 WIDE. ACTION ON HANDLE HAS […]

Post Tagged with , , , , , , , ,
Read More

Aloris Bxa-i Indexable Tool Post Up To 15 Swing Cnc Lathe Quick Change USA

ALORIS BXA-I INDEXABLE TOOL POST UP TO 15 SWING CNC LATHE QUICK CHANGE USA. Never ended up using it, includes the 4 holders pictured as well. The item “ALORIS BXA-I INDEXABLE TOOL POST UP TO 15 SWING CNC LATHE QUICK CHANGE USA” is in sale since Monday, September 27, 2021. This item is in the […]

Post Tagged with , , , , , , , ,
Read More

Swiftray Theme Powered by WordPress